Skip to content
165 changes: 165 additions & 0 deletions configs/ZTWF/ZTWH743
Original file line number Diff line number Diff line change
@@ -0,0 +1,165 @@
/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/

/*
SUPPORTED TARGET - THANK YOU
REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5
DATE: 2026-05-01
*/

#pragma once

#define FC_TARGET_MCU STM32H743

#define BOARD_NAME ZTWH743
#define MANUFACTURER_ID ZTWF

#define USE_ACC
#define USE_ACC_SPI_ICM42688P
Comment thread
lyh6767 marked this conversation as resolved.
Resolved
#define USE_GYRO
#define USE_GYRO_SPI_ICM42688P

#define USE_BARO
#define USE_BARO_BMP280
#define USE_BARO_DPS310
#define USE_FLASH
#define USE_FLASH_W25Q128FV
#define USE_MAX7456

#ifndef USE_MAG
#define USE_MAG
#define USE_MAG_QMC5883L
#define USE_MAG_IST8310
#endif

#define BEEPER_PIN PC2
#define MOTOR1_PIN PA0
#define MOTOR2_PIN PA1
#define MOTOR3_PIN PA2
#define MOTOR4_PIN PA3
#define MOTOR5_PIN PD12
#define MOTOR6_PIN PD13
#define MOTOR7_PIN PD14
#define MOTOR8_PIN PD15
#define LED_STRIP_PIN PE9
#define SERVO1_PIN PE5 // S9
#define SERVO2_PIN PE6 // S10
#define SERVO3_PIN PC8 // S11
#define SERVO4_PIN PC9 // S12
#define UART1_TX_PIN PA9
#define UART1_RX_PIN PA10
#define UART2_TX_PIN PD5
#define UART2_RX_PIN PD6
#define UART3_TX_PIN PD8
#define UART3_RX_PIN PD9
#define UART4_TX_PIN PD1
#define UART4_RX_PIN PD0
#define UART5_TX_PIN PB6
#define UART5_RX_PIN PB5
#define UART6_TX_PIN PC6
#define UART6_RX_PIN PC7
#define UART7_TX_PIN PE8
#define UART7_RX_PIN PE7
#define UART8_TX_PIN PE1
#define UART8_RX_PIN PE0
#define I2C2_SCL_PIN PB10
#define I2C2_SDA_PIN PB11
#define LED0_PIN PB3
#define LED1_PIN PB4
#define SPI1_SCK_PIN PA5
#define SPI1_SDI_PIN PA6
#define SPI1_SDO_PIN PA7
#define SPI2_SCK_PIN PB13
#define SPI2_SDI_PIN PB14
#define SPI2_SDO_PIN PB15
#define SPI3_SCK_PIN PC10
#define SPI3_SDI_PIN PC11
#define SPI3_SDO_PIN PC12
#define SPI4_SCK_PIN PE12
#define SPI4_SDI_PIN PE13
#define SPI4_SDO_PIN PE14
#define ADC_VBAT_PIN PC0
#define ADC_CURR_PIN PC1
#define PINIO1_PIN PE2
#define PINIO2_PIN PE3
#define FLASH_CS_PIN PC13
#define MAX7456_SPI_CS_PIN PD2
#define GYRO_1_EXTI_PIN PC4
#define GYRO_1_CS_PIN PB7
#define GYRO_2_EXTI_PIN PB2
#define GYRO_2_CS_PIN PB8

#define USE_GYRO_CLKIN
#define GYRO_1_CLKIN_PIN PB9
#define GYRO_2_CLKIN_PIN PB9

#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, PA0, 1, 0) \
TIMER_PIN_MAP( 1, PA1, 1, 1) \
TIMER_PIN_MAP( 2, PA2, 1, 2) \
TIMER_PIN_MAP( 3, PA3, 1, 3) \
TIMER_PIN_MAP( 4, PD12, 1, 4) \
TIMER_PIN_MAP( 5, PD13, 1, 5) \
TIMER_PIN_MAP( 6, PD14, 1, 6) \
TIMER_PIN_MAP( 7, PD15, 1, 7) \
TIMER_PIN_MAP( 8, PE5, 1, -1) \
TIMER_PIN_MAP( 9, PE6, 1, -1) \
TIMER_PIN_MAP( 10, PC8, 1, -1) \
TIMER_PIN_MAP( 11, PC9, 1, -1) \
TIMER_PIN_MAP( 12, PB9, 1, -1) \
TIMER_PIN_MAP( 13, PE9 , 1, 8)

#define ADC1_DMA_OPT 9
#define ADC3_DMA_OPT 10

#define FLASH_SPI_INSTANCE SPI3
#define MAX7456_SPI_INSTANCE SPI2

#define BARO_I2C_INSTANCE I2CDEV_2
#define MAG_I2C_INSTANCE I2CDEV_2

#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC

#define DEFAULT_CURRENT_METER_SCALE 120
#define DEFAULT_VOLTAGE_METER_SCALE 210

#define BEEPER_INVERTED

#define PINIO1_BOX 40
#define BOX_USER1_NAME "CAM 1,2"
#define PINIO2_BOX 41
#define BOX_USER2_NAME "12V BEC"

#define GYRO_1_SPI_INSTANCE SPI1
#define GYRO_1_ALIGN CW270_DEG
#define GYRO_2_SPI_INSTANCE SPI4
#define GYRO_2_ALIGN CW0_DEG

#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH
#define ENSURE_MPU_DATA_READY_IS_LOW

#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4
#define GPS_UART SERIAL_PORT_USART6
#define ESC_SENSOR_UART SERIAL_PORT_USART8

Comment thread
coderabbitai[bot] marked this conversation as resolved.
Resolved
Loading