Skip to content
1 change: 1 addition & 0 deletions Manufacturers.md
Original file line number Diff line number Diff line change
Expand Up @@ -157,3 +157,4 @@ This is the official list of manufacturer ids (`manufacturer_id` in the target c
|ZEEZ|Zeez RC|https://www.zeezrc.com/|
|ZERO|Zerodrag|https://zerodrag.in/|
|ZEXM|Shenzhen Zexin Future Technology Co., Ltd|http://zexfpv.com/|
|ZTWF|Shenzhen ZTW Model Science & Technology Co., Ltd|https://www.ztw-esc.com/|
160 changes: 160 additions & 0 deletions configs/ZTWF/ZTWH743/config.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,160 @@
/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/

/*
SUPPORTED TARGET - THANK YOU
REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5
DATE: 2026-05-01
*/

#pragma once

#define FC_TARGET_MCU STM32H743

#define BOARD_NAME ZTWH743
#define MANUFACTURER_ID ZTWF

#define USE_ACC
#define USE_ACC_SPI_ICM42688P
#define USE_GYRO
#define USE_GYRO_SPI_ICM42688P

#define USE_BARO
#define USE_BARO_BMP280
#define USE_BARO_DPS310
#define USE_FLASH
#define USE_FLASH_W25Q128FV
#define USE_MAX7456

#define BEEPER_PIN PC2
#define MOTOR1_PIN PA0
#define MOTOR2_PIN PA1
#define MOTOR3_PIN PA2
#define MOTOR4_PIN PA3
#define MOTOR5_PIN PD12
#define MOTOR6_PIN PD13
#define MOTOR7_PIN PD14
#define MOTOR8_PIN PD15
#define LED_STRIP_PIN PE9
#define SERVO1_PIN PE5 // S9
#define SERVO2_PIN PE6 // S10
#define SERVO3_PIN PC8 // S11
#define SERVO4_PIN PC9 // S12
#define UART1_TX_PIN PA9
#define UART1_RX_PIN PA10
Comment on lines +61 to +62

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Not broken out on the schematic. Should these be removed?

Copy link
Copy Markdown
Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

UART1-TX and UART1-RX are brought out on the PCB in the form of pads.

#define UART2_TX_PIN PD5
#define UART2_RX_PIN PD6
#define UART3_TX_PIN PD8
#define UART3_RX_PIN PD9
#define UART4_TX_PIN PD1
#define UART4_RX_PIN PD0
#define UART5_TX_PIN PB6
#define UART5_RX_PIN PB5
#define UART6_TX_PIN PC6
#define UART6_RX_PIN PC7
#define UART7_TX_PIN PE8
#define UART7_RX_PIN PE7
#define UART8_TX_PIN PE1

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Not broken out on the schematic

Copy link
Copy Markdown
Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

UART6_RX、UART6_TX、UART7_RX、UART7_TX are brought out on the PCB in the form of pads.

UART8_TX is indeed not brought out in any form, and UART8_RX is used for the ESC's TELEMETRY. May I ask if I need to delete the definition of UART8_TX in config.h? At that time, it was intended to preserve the completeness of the UART, but I actually think deleting it or not would not affect the flight controller's use. However, everything should be based on BF's opinion.

#define UART8_RX_PIN PE0
#define I2C2_SCL_PIN PB10
#define I2C2_SDA_PIN PB11
#define LED0_PIN PB3
#define LED1_PIN PB4
#define SPI1_SCK_PIN PA5
#define SPI1_SDI_PIN PA6
#define SPI1_SDO_PIN PA7
#define SPI2_SCK_PIN PB13
#define SPI2_SDI_PIN PB14
#define SPI2_SDO_PIN PB15
#define SPI3_SCK_PIN PC10
#define SPI3_SDI_PIN PC11
#define SPI3_SDO_PIN PC12
#define SPI4_SCK_PIN PE12
#define SPI4_SDI_PIN PE13
#define SPI4_SDO_PIN PE14
#define ADC_VBAT_PIN PC0
#define ADC_CURR_PIN PC1
#define PINIO1_PIN PE2
#define PINIO2_PIN PE3
#define FLASH_CS_PIN PC13
#define MAX7456_SPI_CS_PIN PD2
#define GYRO_1_EXTI_PIN PC4
#define GYRO_1_CS_PIN PB7
#define GYRO_2_EXTI_PIN PB2
#define GYRO_2_CS_PIN PB8

#define USE_GYRO_CLKIN
#define GYRO_1_CLKIN_PIN PB9
#define GYRO_2_CLKIN_PIN PB9

#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, PA0, 1, 0) \
TIMER_PIN_MAP( 1, PA1, 1, 1) \
TIMER_PIN_MAP( 2, PA2, 1, 2) \
TIMER_PIN_MAP( 3, PA3, 1, 3) \
TIMER_PIN_MAP( 4, PD12, 1, 4) \
TIMER_PIN_MAP( 5, PD13, 1, 5) \
TIMER_PIN_MAP( 6, PD14, 1, 6) \
TIMER_PIN_MAP( 7, PD15, 1, -1) \
TIMER_PIN_MAP( 8, PE5, 1, -1) \
TIMER_PIN_MAP( 9, PE6, 1, -1) \
TIMER_PIN_MAP( 10, PC8, 1, -1) \
TIMER_PIN_MAP( 11, PC9, 1, -1) \
TIMER_PIN_MAP( 12, PB9, 1, -1) \
TIMER_PIN_MAP( 13, PE9 , 1, 8)

#define ADC1_DMA_OPT 9
#define ADC3_DMA_OPT 10

#define FLASH_SPI_INSTANCE SPI3
#define MAX7456_SPI_INSTANCE SPI2

#define BARO_I2C_INSTANCE I2CDEV_2
#define MAG_I2C_INSTANCE I2CDEV_2

#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC

#define DEFAULT_VOLTAGE_METER_SCALE 210

#define BEEPER_INVERTED

#define PINIO1_BOX 40
#define BOX_USER1_NAME "CAM 1,2"
#define PINIO2_BOX 41
#define BOX_USER2_NAME "12V BEC"

#define GYRO_1_SPI_INSTANCE SPI1
#define GYRO_1_ALIGN CW270_DEG
#define GYRO_2_SPI_INSTANCE SPI4
#define GYRO_2_ALIGN CW0_DEG

#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH

#ifdef USE_OSD_HD
#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4
#endif
#ifdef USE_GPS
#define GPS_UART SERIAL_PORT_USART6
Comment thread
osirisinferi marked this conversation as resolved.
Resolved
#endif
#define ESC_SENSOR_UART SERIAL_PORT_USART8
Loading