H50 and T9 led , display and other overlays update

patch/kernel/archive/rockchip64-6.12/overlay/rockchip-rk3318-box-led-conf6.dtso

@@ -9,6 +9,19 @@
  * T98_RK3318 (Hongtop H50)
  */
 
+&gpio_led {
+
+	working {
+		gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "mmc2";
+	};
+        ir-led {
+                label = "ir-led";
+                gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+                linux,default-trigger = "activity";
+            };
+};
+
 &{/} {
 
 	i2c-display {
@@ -25,7 +38,7 @@
 			#address-cells = <2>;
 			#size-cells = <0>;
 
-			compatible = "fdhisi,fd650";
+			compatible = "fdhisi,fd655"; /* fd650 not able to set segment 8 (07) for function leds */
 			reg = <0x24>;
 			tm16xx,digits = [04 03 02 01];
 			tm16xx,segment-mapping = [03 04 05 00 01 02 06];
@@ -55,3 +68,26 @@
 	};
 
 };
+
+/* modify existimg regulator to power on HDMI */
+
+&{/vcc-host-vbus} {
+    status = "disabled";
+};
+&{/} {
+	vcc-host-hdmi-vbus {
+	        compatible = "regulator-fixed";
+	        gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+	        pinctrl-names = "default";
+	        pinctrl-0 = <&usb30_host_drv>;
+	        regulator-name = "vcc_host_hdmi_vbus";
+	        regulator-always-on;
+	        regulator-boot-on;
+	        regulator-min-microvolt = <5000000>;
+	        regulator-max-microvolt = <5000000>;
+	        vin-supply = <&vcc_sys>;
+   	 };
+
+   };
+
+

patch/kernel/archive/rockchip64-6.12/overlay/rockchip-rk3318-box-led-conf7.dtso

@@ -6,8 +6,15 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 
 /**
- * T9_RK3318 (T9 Sunwell 3318 version 4+32 GB)
+ * T9_RK3318 (T9 Sunwell 3318/3328 version 4+32 GB)
  */
+&gpio_led {
+
+        working {
+        status = "disabled"; /* there is no working led */
+        };
+
+};
 
 &{/} {
 
@@ -23,12 +30,12 @@
 		#size-cells = <0>;
 
 		display@24 {
-			compatible = "fdhisi,fd655";
+			compatible = "fdhisi,fd6551"; /* Allows 8 brightness levels and status led restore */
 			reg = <0x24>;
 			tm16xx,digits = [01 02 03 04];
 			tm16xx,segment-mapping = [03 04 05 00 01 02 06];
 
-			leds {
+
 				#address-cells = <2>;
 				#size-cells = <0>;
 
@@ -60,14 +67,14 @@
 				led@0,5 {
 					reg = <0 5>;
 					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "stmmac-0:00:link";
 				};
 
 				led@0,6 {
 					reg = <0 6>;
 					function = LED_FUNCTION_WLAN;
 				};
-
-			};
+
 
 		};
 

patch/kernel/archive/rockchip64-6.18/overlay/rockchip-rk3318-box-led-conf6.dtso

@@ -9,6 +9,20 @@
  * T98_RK3318 (Hongtop H50)
  */
 
+&gpio_led {
+
+	working {
+		gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "mmc2"; /* usually timer but here will alternate a red and blue led */
+	};
+        ir-led {
+                label = "ir-led";
+                gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+                linux,default-trigger = "activity"; /* blue led close to ir receiver */
+                default-state = "off";
+            };
+};
+
 &{/} {
 
 	i2c_aux_display: i2c-aux-display {
@@ -23,7 +37,7 @@
 		#size-cells = <0>;
 
 		display@24 {
-			compatible = "fdhisi,fd650";
+			compatible = "fdhisi,fd650" , "titanmec,tm1650"; /* do not remove tm1650 */
 			reg = <0x24>;
 
 			digits {
@@ -32,22 +46,22 @@
 
 				digit@0 {
 					reg = <0>;
-					segments = <1 3>, <1 4>, <1 5>, <1 0>, <1 1>, <1 2>, <1 6>;
+					segments = <0 3>, <0 4>, <0 5>, <0 0>, <0 1>, <0 2>, <0 6>;
 				};
 
 				digit@1 {
 					reg = <1>;
-					segments = <2 3>, <2 4>, <2 5>, <2 0>, <2 1>, <2 2>, <2 6>;
+					segments = <1 3>, <1 4>, <1 5>, <1 0>, <1 1>, <1 2>, <1 6>;
 				};
 
 				digit@2 {
 					reg = <2>;
-					segments = <3 3>, <3 4>, <3 5>, <3 0>, <3 1>, <3 2>, <3 6>;
+					segments = <2 3>, <2 4>, <2 5>, <2 0>, <2 1>, <2 2>, <2 6>;
 				};
 
 				digit@3{
 					reg = <3>;
-					segments = <4 3>, <4 4>, <4 5>, <4 0>, <4 1>, <4 2>, <4 6>;
+					segments = <3 3>, <3 4>, <3 5>, <3 0>, <3 1>, <3 2>, <3 6>;
 				};
 
 			};
@@ -56,27 +70,29 @@
 				#address-cells = <2>;
 				#size-cells = <0>;
 
-				led@1,7 {
-					reg = <1 7>;
+				led@0,7 {
+					reg = <0 7>;
 					function = "usb";
 					linux,default-trigger = "usb-host";
+
 				};
 
-				led@2,7 {
-					reg = <2 7>;
+				led@1,7 {
+					reg = <1 7>;
 					function = "colon";
 				};
 
-				led@3,7 {
-					reg = <3 7>;
+				led@2,7 {
+					reg = <2 7>;
 					function = LED_FUNCTION_LAN;
 					linux,default-trigger = "stmmac-0:00:link";
 				};
 
-				led@4,7 {
-					reg = <4 7>;
+				led@3,7 {
+					reg = <3 7>;
 					function = LED_FUNCTION_WLAN;
 					linux,default-trigger = "mmc1";
+
 				};
 
 			};
@@ -86,3 +102,25 @@
 	};
 
 };
+/* modify existimg regulator to power on HDMI */
+&{/vcc-host-vbus} {
+    status = "disabled";
+};
+
+&{/} {
+	vcc-host-hdmi-vbus {
+	        compatible = "regulator-fixed";
+	        gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+	        pinctrl-names = "default";
+	        pinctrl-0 = <&usb30_host_drv>;
+	        regulator-name = "vcc_host_hdmi_vbus";
+	        regulator-always-on;
+	        regulator-boot-on;
+	        regulator-min-microvolt = <5000000>;
+	        regulator-max-microvolt = <5000000>;
+	        vin-supply = <&vcc_sys>;
+   	 };
+
+   };
+
+

patch/kernel/archive/rockchip64-6.18/overlay/rockchip-rk3318-box-led-conf7.dtso

@@ -6,8 +6,16 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 
 /**
- * T9_RK3318 (T9 Sunwell 3318)
+ * T9_RK3328 (T9 Sunwell 3328 / 3318)
  */
+&gpio_led {
+
+        working {
+        status = "disabled"; /* there is no working led */
+        };
+
+};
+
 
 &{/} {
 
@@ -23,7 +31,7 @@
 		#size-cells = <0>;
 
 		display@24 {
-			compatible = "fdhisi,fd655";
+			compatible = "fdhisi,fd6551"; /* it is a fd6551 - 8 levels of brightness are available */
 			reg = <0x24>;
 
 			digits {
@@ -84,6 +92,7 @@
 				led@0,5 {
 					reg = <0 5>;
 					function = LED_FUNCTION_LAN;
+                                        linux,default-trigger = "stmmac-0:00:link";
 				};
 
 				led@0,6 {

patch/kernel/archive/rockchip64-7.1/overlay/rockchip-rk3318-box-led-conf6.dtso

@@ -9,6 +9,20 @@
  * T98_RK3318 (Hongtop H50)
  */
 
+&gpio_led {
+
+	working {
+		gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "mmc2"; /* usually timer but here will alternate a red and blue led */
+	};
+        ir-led {
+                label = "ir-led";
+                gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+                linux,default-trigger = "activity"; /* blue led close to ir receiver */
+                default-state = "off";
+            };
+};
+
 &{/} {
 
 	i2c_aux_display: i2c-aux-display {
@@ -23,7 +37,7 @@
 		#size-cells = <0>;
 
 		display@24 {
-			compatible = "fdhisi,fd650";
+			compatible = "fdhisi,fd650" , "titanmec,tm1650"; /* do not remove tm1650 */
 			reg = <0x24>;
 
 			digits {
@@ -32,22 +46,22 @@
 
 				digit@0 {
 					reg = <0>;
-					segments = <1 3>, <1 4>, <1 5>, <1 0>, <1 1>, <1 2>, <1 6>;
+					segments = <0 3>, <0 4>, <0 5>, <0 0>, <0 1>, <0 2>, <0 6>;
 				};
 
 				digit@1 {
 					reg = <1>;
-					segments = <2 3>, <2 4>, <2 5>, <2 0>, <2 1>, <2 2>, <2 6>;
+					segments = <1 3>, <1 4>, <1 5>, <1 0>, <1 1>, <1 2>, <1 6>;
 				};
 
 				digit@2 {
 					reg = <2>;
-					segments = <3 3>, <3 4>, <3 5>, <3 0>, <3 1>, <3 2>, <3 6>;
+					segments = <2 3>, <2 4>, <2 5>, <2 0>, <2 1>, <2 2>, <2 6>;
 				};
 
 				digit@3{
 					reg = <3>;
-					segments = <4 3>, <4 4>, <4 5>, <4 0>, <4 1>, <4 2>, <4 6>;
+					segments = <3 3>, <3 4>, <3 5>, <3 0>, <3 1>, <3 2>, <3 6>;
 				};
 
 			};
@@ -56,27 +70,29 @@
 				#address-cells = <2>;
 				#size-cells = <0>;
 
-				led@1,7 {
-					reg = <1 7>;
+				led@0,7 {
+					reg = <0 7>;
 					function = "usb";
 					linux,default-trigger = "usb-host";
+
 				};
 
-				led@2,7 {
-					reg = <2 7>;
+				led@1,7 {
+					reg = <1 7>;
 					function = "colon";
 				};
 
-				led@3,7 {
-					reg = <3 7>;
+				led@2,7 {
+					reg = <2 7>;
 					function = LED_FUNCTION_LAN;
 					linux,default-trigger = "stmmac-0:00:link";
 				};
 
-				led@4,7 {
-					reg = <4 7>;
+				led@3,7 {
+					reg = <3 7>;
 					function = LED_FUNCTION_WLAN;
 					linux,default-trigger = "mmc1";
+
 				};
 
 			};
@@ -86,3 +102,23 @@
 	};
 
 };
+/* modify existimg regulator to power on HDMI */
+&{/vcc-host-vbus} {
+    status = "disabled";
+};
+
+&{/} {
+	vcc-host-hdmi-vbus {
+	        compatible = "regulator-fixed";
+	        gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+	        pinctrl-names = "default";
+	        pinctrl-0 = <&usb30_host_drv>;
+	        regulator-name = "vcc_host_hdmi_vbus";
+	        regulator-always-on;
+	        regulator-boot-on;
+	        regulator-min-microvolt = <5000000>;
+	        regulator-max-microvolt = <5000000>;
+	        vin-supply = <&vcc_sys>;
+   	 };
+
+   };