QTC-UMD · josephmlev · Jan 14, 2026 · Jan 14, 2026 · Jan 26, 2026 · Jan 26, 2026
diff --git a/README.md b/README.md
@@ -16,6 +16,16 @@ and is designed such that all power is drawn from the Pico's power supply.
 
 SMD passive components are no smaller than 0805 to facilitate hand soldering.
 
+## Screenshots
+The following screenshots are taken from Kicad
+
+<img src="./prawnBlaster3dRenderWithPi.png" alt="PrawnBlaster 3D Render" width="600">
+
+<img src="./prawnBlasterPcb.png" alt="PrawnBlaster PCB Layout" width="600">
+Note: Scale on left is in mm. PCB is about 58 x 93mm.
+
+<img src="./prawnBlasterSchematic.png" alt="PrawnBlaster Schematic" width="600">
+
 ## Fabrication
 
 The designs in the `KiCAD\gerbers` subdirectory were made to be printed using a Bantham Tools CNC/PCB router.
@@ -43,4 +53,4 @@ We use the NMUSBEVALEXC dual USB port eval board from Murata as it can provide s
 
 [1]: https://github.com/labscript-suite/PrawnBlaster
 [2]: https://docs.labscriptsuite.org/en/latest/
-[3]: https://github.com/TU-Darmstadt-APQ/Prawnblaster-Breakout
+[3]: https://github.com/TU-Darmstadt-APQ/Prawnblaster-Breakout
diff --git a/prawnBlaster3dRender.png b/prawnBlaster3dRender.png
diff --git a/prawnBlaster3dRenderWithPi.png b/prawnBlaster3dRenderWithPi.png
diff --git a/prawnBlasterPcb.png b/prawnBlasterPcb.png
diff --git a/prawnBlasterSchematic.png b/prawnBlasterSchematic.png