NAS-141336 / 27.0.0-BETA.1 / Update LTS Linux kernel to v6.18.35#292
Merged
Conversation
[ Upstream commit a8d8bef6b45bf7cc0b1f6110c5cd8d0160a9bad7 ] strset_prepare_data() passes ETHTOOL_A_HEADER_FLAGS (3) as the header attribute to ethnl_req_get_phydev(). This is incorrect, in the main attr space 3 is ETHTOOL_A_STRSET_COUNTS_ONLY, not the request header attr. The correct constant is ETHTOOL_A_STRSET_HEADER (1). ethnl_req_get_phydev() only uses this value for the extack, so this is not a "functionally visible"(?) bug. Fixes: e96c93a ("net: ethtool: strset: Allow querying phy stats by index") Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260526153533.2779187-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…allback [ Upstream commit 2376586f85f972fefe701f095bb37dcfe7405d21 ] All ethtool driver op calls should be sandwiched between ethnl_ops_begin() / ethnl_ops_complete(). In Netlink eeprom code, if the paged access failed we fall back to old API, but we first call _complete() and the fallback never does its own ethnl_ops_begin(). Move the fallback into the _begin() / _complete() section. Fixes: 96d971e ("ethtool: Add fallback to get_module_eeprom from netlink command") Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260526153533.2779187-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67cfdd9210b99f260b3e0afeb9525e0acc7be31e ]
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc.
Fixes: 96d971e ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d5e7a46a9f6d8f503b41bfefef70659845f1679 ]
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment.
Fixes: 8610c7c ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Rahul Chandelkar <rc@rexion.ai>
Link: https://patch.msgid.link/20260525154031.2290876-1-rc@rexion.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
…ing netems to qdisc tree" [ Upstream commit eda0b7f203bb166c98d1418b204135bd566ac83b ] This reverts commit ec8e0e3. The original patch rejects any tree containing two netems when either has duplication set, even when they sit on unrelated classes of the same classful parent. That broke configurations that have worked since netem was introduced. The re-entrancy problem the original commit was trying to solve is handled by later patch using tc_depth flag. Doing this revert will (re)expose the original bug with multiple netem duplication. When this patch is backported make sure and get the full series. Fixes: ec8e0e3 ("net/sched: Restrict conditions for adding duplicating netems to qdisc tree") Reported-by: Ji-Soo Chung <jschung2@proton.me> Reported-by: Gerlinde <lrGerlinde@mailfence.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220774 Reported-by: zyc zyc <zyc199902@zohomail.cn> Closes: https://lore.kernel.org/all/19adda5a1e2.12410b78222774.9191120410578703463@zohomail.cn/ Reported-by: Manas Ghandat <ghandatmanas@gmail.com> Closes: https://lore.kernel.org/netdev/f69b2c8f-8325-4c2e-a011-6dbc089f30e4@gmail.com/ Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260525122556.973584-3-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 463a1271aa26eac992851b9d98cc75bc3cd4a1ed ] When SMMU is disabled, the hibmcge driver may receive corrupted packets. The hardware writes packet data and descriptors to the same page, but with Relaxed Ordering enabled, PCI write transactions may not be strictly ordered. This can cause the driver to observe a valid descriptor before the corresponding packet data is fully written. Fix this by clearing PCI_EXP_DEVCTL_RELAX_EN in the PCI bridge control register to ensure strict write ordering between packet data and descriptors. Fixes: f72e255 ("net: hibmcge: Implement rx_poll function to receive packets") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20260525144525.94884-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc993e0927ec8bd98ea33377ada03295fcda0f24 ] nvmet_tcp_state_change(), a socket callback that runs in BH context, can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue() and tls_handshake_cancel(). handshake_req_cancel() acquires hn->hn_lock with plain spin_lock(). If a process-context thread on the same CPU holds hn->hn_lock when a softirq invokes the cancel path, the lock attempt deadlocks. This is the only caller that invokes tls_handshake_cancel() from BH context; every other consumer calls it from process context. Deferring the cancel to process context in the NVMe target is not straightforward: nvmet_tcp_schedule_release_queue() must call tls_handshake_cancel() atomically with its state transition to DISCONNECTING. If the cancel were deferred, the handshake completion callback could fire in the window before the cancel runs, observe the unexpected state, and return without dropping its kref on the queue. Reworking that interlock is considerably more invasive than hardening the handshake lock. Convert all hn->hn_lock acquisitions from spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is never taken with softirqs enabled. Fixes: 675b453 ("nvmet-tcp: enable TLS handshake upcall") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Hannes Reinecke <hare@kernel.org> Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-1-66c616906ead@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9015985b5eb1a90eb86caf5bce1dfcf1aa38f8ad ] nvme_tcp_tls_done() assigns queue->tls_err in three branches. The ENOKEY lookup failure and the EOPNOTSUPP initializer both store negative errnos. The third branch, reached when the handshake layer reports a non-zero status, stores -status. The handshake layer delivers status to the consumer callback as a negative errno; the other in-tree consumers -- xs_tls_handshake_done() and the nvmet target callback -- treat their status argument that way. The extra negation in nvme_tcp_tls_done() flips the sign, leaving tls_err as a positive value (for instance, +EIO), which nvme_tcp_start_tls() then returns to its caller. Drop the extra negation so queue->tls_err uniformly carries a negative errno on failure. Fixes: be8e82c ("nvme-tcp: enable TLS handshake upcall") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-2-66c616906ead@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b22d433aa13f68e3cd9534ca9a5f4277bfa01c2 ]
handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes: 3b3009e ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00e1950716c6ed67d74777b2db286b0fa23b4be9 ] l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). Fixes: 15f02b9 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c2713b204e6cb6a94587bc6bf6935107df5479 ] If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. Fixes: 15f02b9 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 525daaea459fc215f432de1b8debbd9144bf97b0 ] Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained. Fixes: 877afad ("Bluetooth: When HCI work queue is drained, only queue chained work") Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf88b35e06f1b385f7f6228060ae541d44fbb72 ] Before resetting or closing the device, protocol counters should also be zeroed. Fixes: d0b1370 ("Bluetooth: hci_sync: Rework init stages") Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5c627d90809b793fc053849b3a00609db305776 ] scoped_guard() is implemented as a for loop. Using it to protect code using the continue statement changes the flow as we now only break out of the hidden loop inside scoped_guard(), not the original for loop. Use a regular code block instead. Fixes: c7fe19e ("gpio: adnp: use lock guards for the I2C lock") Reported-by: David Lechner <dlechner@baylibre.com> Closes: https://lore.kernel.org/all/cde2abb2-4cc8-4fc9-b34a-0c5d2b95779f@baylibre.com/ Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260522073527.9812-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…_do_write() [ Upstream commit 8a122b5e72cc0043705f0d524bcd15f0c0b3ec15 ] If *ppos is non-zero (user-space write split over multiple calls to write()) then simple_write_to_buffer() won't initialize the start of the buffer. Really, non-zero values for *ppos aren't going to work at all. Check for that and return -EINVAL at the start of the function. Fixes: 91581c4 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://patch.msgid.link/ahP3BJWWy-m_qI0X@stanley.mountain Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e46c18d5d87f063a93ae0fe7662fbf6660459d5 ] The bank->clk was previously obtained via of_clk_get() and manually prepared/enabled. However, it was missing a corresponding clk_put() in both the error paths and the remove function, leading to a reference leak. Convert the allocation to devm_clk_get_enabled(), which also properly propagates failures from clk_prepare_enable() that were previously ignored. The GPIO bank device uses the same OF node as the previous of_clk_get() call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same clock provider entry. Fix the reference leak and simplify the code by removing the manual clk_disable_unprepare() calls in the probe error paths and in the remove function. Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi <scardracs@disroot.org> Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9500077678230e36d22bf16d2b9539c13e59a801 ] Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove(). 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi <scardracs@disroot.org> Link: https://patch.msgid.link/20260526171050.12785-3-scardracs@disroot.org [Bartosz: don't emit an error message on devres allocation failure] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…h failure [ Upstream commit 17bfe0a8c014ee1d542ad352cd6a0a505361664a ] When queue allocation fails partway through, the error cleanup frees and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as mana_remove(), mana_change_mtu() recovery, and internal error handling in mana_alloc_queues() can subsequently call into functions that dereference these pointers without NULL checks: - mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26). - mana_destroy_vport() iterates apc->rxqs without a NULL check. - mana_fence_rqs() iterates apc->rxqs without a NULL check. - mana_dealloc_queues() iterates apc->tx_qp without a NULL check. Add NULL guards for apc->rxqs in mana_fence_rqs(), mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue draining when TX queues were never allocated or already freed. Fixes: ca9c54d ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20260525081129.1230035-2-dipayanroy@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b05aa36ee24297d7296ca58dfd8c448d0e4cda3 ]
When mana_per_port_queue_reset_work_handler() runs after a previous
detach succeeded but attach failed, the port is left in a detached
state with apc->tx_qp and apc->rxqs already freed. Calling
mana_detach() again unconditionally leads to NULL pointer dereferences
during queue teardown.
Add an early exit in mana_detach() when the port is already in
detached state (!netif_device_present) for non-close callers, making
it safe to call idempotently. This allows the queue reset handler and
other recovery paths to simply retry mana_attach() without redundant
teardown.
Fixes: 3b194343c250 ("net: mana: Implement ndo_tx_timeout and serialize queue resets per port.")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260525081129.1230035-3-dipayanroy@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f14fe6395a8b3d961a61e138ad7b36ba3626dd4e ] sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept. Fixes: 668c9be ("sctp: implement assign_number for sctp_stream_interleave") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20260527032411.60959-1-kipreyyy@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e584c304cfb94a759417130b1fc6d30b30c4cce ] virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule. Fixes: 581512a ("vsock/virtio: MSG_ZEROCOPY flag support") Signed-off-by: Lin Ma <malin89@huawei.com> Signed-off-by: Rongzhen Cui <cuirongzhen@huawei.com> Signed-off-by: Jingguo Tan <tanjingguo@huawei.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260527023301.1075581-1-malin89@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f72412bcf60144f252b0d6205106abf14344abc ] Sashiko reported this issue [1]. Apply the same fix as commit f8d8ce1 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings) without waiting for RCU readers; rt->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &rt->fib6_siblings, causing a CPU stall. fib6_del_route() always WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev Fixes: d9ccb18 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c7da87c2dc860bb17ca1ece942495d28b1ce3b9 ] Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev Fixes: d9ccb18 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff6e798c2eac3ebd0501ad7e796f583fab928de8 ] When SKBFL_MANAGED_FRAG_REFS is set, frag pages are not refcounted but their lifetime is controlled by the attached ubuf_info. To make a copy of the skb_shared_info, we either should clear the flag and reference the frags, or keep the flag and have frags unreferenced. pskb_carve_inside_header() and pskb_carve_inside_nonlinear() don't follow the rule and thus can leak page references. Let's clear SKBFL_MANAGED_FRAG_REFS from the original skb to fix it. It's the simplest way to address it, but there are more performant ways to do that if it ever becomes a problem. Link: https://lore.kernel.org/all/20260523085809.26331-1-nvminh232@clc.fitus.edu.vn/ Fixes: 753f1ca ("net: introduce managed frags infrastructure") Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com> Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/1e2086aa69217d7f9c8da3d38f5be7160f1b4cd1.1779993185.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dccc0c3ddf8f16071736f98a7d6dd46a2d43e037 ] Some rc device drivers have a race condition between rc_unregister_device() and irq or urb callbacks. This is because rc_unregister_device() does two things, it marks the device as unregistered so no new commands can be issued and then it calls rc_free_device(). This means the driver has no chance to cancel any pending urb callbacks or interrupts after the device has been marked as unregistered. Those callbacks may access struct rc_dev or its members (e.g. struct ir_raw_event_ctrl), which have been freed by rc_free_device(). This change removes the implicit call to rc_free_device() from rc_unregister_device(). This means that device drivers can call rc_unregister_device() in their remove or disconnect function, then cancel all the urbs and interrupts before explicitly calling rc_free_device(). Note this is an alternative fix for an issue found by Haotian Zhang, see the Closes: tags. Reported-by: Haotian Zhang <vulab@iscas.ac.cn> Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/ Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Stable-dep-of: 646ebdd31058 ("media: rc: ttusbir: fix inverted error logic") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 646ebdd3105809d84ed04aa9e92e47e89cc44502 ]
We have to report ENOMEM if no buffer is allocated.
Typo dropped a "!". Restore it.
Fixes: 50acaad3d202 ("media: rc: ttusbir: respect DMA coherency rules")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a8cf165566ba55a39fd0f4de172119dd646d39a ] build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. Fixes: bc3e9dd ("cifs: Change SIDs in ACEs while transferring file ownership.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…gnal return" [ Upstream commit 44eeff9bc467bc7d1fec34fc3f6001f385fe462c ] This reverts dc8aa31 ("x86/fpu: Refine and simplify the magic number check during signal return"). The aforementioned commit broke applications that construct signal frames in userspace (such as CRIU and gVisor) if the frame's xstate size is smaller than the kernel's fpstate->user_size. Furthermore, this introduces a critical issue for checkpoint/restore tools like CRIU. If a process is checkpointed while inside a signal handler, its stack contains a signal frame formatted according to the source host's xstate capabilities. If that process is later restored on a destination host with larger xstate capabilities (e.g., a newer CPU with more features enabled, resulting in a larger fpstate->user_size), the kernel will look for FP_XSTATE_MAGIC2 at the destination host's larger user_size offset instead of the offset encoded in the frame's fx_sw->xstate_size. This causes the magic2 check to fail, forcing sigreturn to silently fall back to "FX-only" mode. Upon return from the signal handler, the process's extended state is reset to initial values instead of being restored, leading to silent data corruption. The aforementioned commit cited d877550 ("x86/fpu: Stop relying on userspace for info to fault in xsave buffer") as justification to stop relying on userspace for the magic number check. However, these two changes are fundamentally different. The last one only changed how much memory the kernel ensures is paged-in before running XRSTOR to prevent an infinite loop. It did not change the signal frame format or how the layout is validated. Reverting this change restores the use of fx_sw->xstate_size for locating magic2 and restores the necessary sanity checks, ensuring that the signal frame remains self-describing and portable. [ bp: Massage commit message. ] Fixes: dc8aa31 ("x86/fpu: Refine and simplify the magic number check during signal return") Signed-off-by: Andrei Vagin <avagin@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Chang S. Bae <chang.seok.bae@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20260429000623.3356606-1-avagin@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea34567db0a6b3a7ce78ba421592344315c8f90e ] Re-add GFP_DMA when allocating memory for CHSC control blocks. On some supported machines, CHSC cannot access memory outside the DMA zone, causing CHSC command failures. Cc: stable@vger.kernel.org Fixes: a3a64a4 ("s390/cio: remove unneeded DMA zone allocation") Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> [ adjusted context to account for missing commit bf4afc53b77ae ] Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fbceb39b536e40c2f7cc47ab42037bb7c2b7ced9 upstream. EDP specification says: "If either VSC SDP is unable to be transmitted 100 ns before the SU region, the Source device may optionally transmit the VSC SDP during the prior video scan line’s HBlank period There is a Intel specific drm dp register currently containing bits related how TCON can support PSR2 with SDP on prior line." Unfortunately many panels are having problems in implementing this. So there is a custom Intel specific DPCD register (INTEL_WA_REGISTER_CAPS) to figure out if this is properly implemented on a panel or if panel doesn't require that 100 ns delay before the SU region. Here are the definitions in this custom DPCD address: 0 = Panel doesn't support SDP on prior line 1 = Panel supports SDP on prior line 2 = Panel doesn't have 100ns requirement 3 = Reserved Add definitions for this new register and it's values into new header intel_dpcd.h. v2: add INTEL_DPCD_ prefix to definitions Bspec: 74741 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patch.msgid.link/20260515095756.2799483-2-jouni.hogander@intel.com (cherry picked from commit 1da1c9294825f08f622c473480d185680c2a3b75) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
…bus_lock [ Upstream commit 4e4af55aaca7f6d7673d5f9889ad0529db86a048 ] adm1266_state_read() backs the sequencer_state debugfs entry and issues an i2c_smbus_read_word_data(client, ADM1266_READ_STATE) against the device without taking pmbus_lock. pmbus_core holds pmbus_lock around its own multi-transaction sequences (notably the "set PAGE, then read paged register" pattern used by hwmon attributes), so an unlocked debugfs reader can land between a PAGE write and the subsequent paged read in another thread. READ_STATE itself is not paged, so it cannot corrupt PAGE in flight, but the same defensive serialisation that applies to the GPIO accessors applies here: any direct device access from outside pmbus_core should be ordered with respect to pmbus_core's own. Take pmbus_lock at the top of adm1266_state_read() via the scope-based guard(). Fixes: ed1ff45 ("hwmon: (pmbus/adm1266) add debugfs for states") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai> Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-8-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bab8c6fb5af8df7e753d196c1262cb78e92ca872 ] adm1266_gpio_get(), adm1266_gpio_get_multiple(), and adm1266_gpio_dbg_show() all issue PMBus reads against the device but none of them take pmbus_lock. The pmbus_core framework holds pmbus_lock around its own multi-transaction sequences (notably the "set PAGE, then read paged register" pattern used by hwmon attributes), so an unlocked GPIO accessor can land between a PAGE write and the subsequent paged read in another thread and corrupt either side's view of the device state machine. Take pmbus_lock at the top of each of the three accessors via the scope-based guard(). The lock is uncontended in the common case and adds only a single mutex round-trip per call. Fixes: d98dfad ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-6-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 67ea9d353d0ba12bdbc9183ff568dead9e949b80 ]
flush_rcu_sheaves_on_cache() calls queue_work_on() in a
for_each_online_cpu() loop, which requires the cpu to stay online.
But cpus_read_lock() is not held in kvfree_rcu_barrier_on_cache() and the
set of "online cpus" is subject to change.
There are two paths that call flush_rcu_sheaves_on_cache():
// has cpus_read_lock()
flush_all_rcu_sheaves()
-> flush_rcu_sheaves_on_cache()
// no cpus_read_lock()
kvfree_rcu_barrier_on_cache()
-> flush_rcu_sheaves_on_cache()
Fix this by holding cpus_read_lock() in kvfree_rcu_barrier_on_cache().
Why not move cpus_read_lock() from flush_all_rcu_sheaves() into
flush_rcu_sheaves_on_cache()? The reason is it would introduce a new lock
order (slab_mutex -> cpu_hotplug_lock). The reverse order
(cpu_hotplug_lock -> slab_mutex) is established by
- cpuhp_setup_state_nocalls(..., slub_cpu_setup, ...)
- kmem_cache_destroy()
The two orders together would form an AB-BA deadlock.
Finally, add lockdep_assert_cpus_held() in flush_rcu_sheaves_on_cache()
to catch the same problem in the future.
Fixes: 0f35040de593 ("mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction")
Cc: <stable@vger.kernel.org>
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Link: https://patch.msgid.link/20260512035035.762317-1-wangqing7171@gmail.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e027c218c482c6a0ae1948129ccda3b0a2033368 ] LAN8814 QSGMII soft reset was moved into the probe function to avoid triggering it for each of 4 PHY-s in the package. However, that broke QSGMII link between the MAC and PHY on most LAN8814 PHY-s, specificaly for us on the Microchip LAN969x switch. Reading the QSGMII status registers it was visible that lanes were only partially synced. It looks like the reset timing is crucial, so lets move the reset back into the .config_init function but guard it with phy_package_init_once() to avoid it being triggered on each of 4 PHY-s in the package. Change the probe function to use phy_package_probe_once() for coma and PtP setup. Fixes: 96a9178 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://patch.msgid.link/20260428134138.1741253-1-robert.marko@sartura.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a4c828b8b29b47534814ade26d9aee09d5101fc ] When a USB device is unplugged from the dual-role port, the device-mode path in tegra_xhci_id_work() explicitly clears both SS and HS port power via direct hub_control ClearPortFeature(POWER) calls. This preempts the xHCI controller's normal disconnect processing -- PORT_CSC is never generated, the USB core never sees the disconnect, and the device remains in its internal tree as a ghost visible in lsusb. Add an otg_set_port_power flag to control whether the dual-role switch path performs explicit port power management. SoCs that need it (Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and beyond) rely on the PHY mode change to handle disconnect naturally and skip all port power calls. Within the port power path, otg_reset_sspi additionally gates the SSPI reset sequence on host-mode entry for SoCs that require it. Flags set per SoC: Tegra124, Tegra186 -> otg_set_port_power Tegra210 -> otg_set_port_power, otg_reset_sspi Tegra194 and later -> (none) [ Backport to 6.18.y: keep the host-mode snapshot in the existing tegra->lock section, retain pm_runtime_mark_last_busy() in the host port-power path, preserve str_on_off(), and resolve context around the SoC ops/Tegra234 entries. ] Fixes: f836e78 ("usb: xhci-tegra: Add OTG support") Cc: stable@vger.kernel.org Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com> Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c58e9456e30c7098cbcd9f04571992be8a2e4e63 upstream.
The active_req field serves double duty as both the "is a TX in
flight" flag (NULL means idle) and the storage for the in-flight
message pointer. When a client sends NULL via mbox_send_message(),
active_req is set to NULL, which the framework misinterprets as
"no active request". This breaks the TX state machine by:
- tx_tick() short-circuits on (!mssg), skipping the tx_done
callback and the tx_complete completion
- txdone_hrtimer() skips the channel entirely since active_req
is NULL, so poll-based TX-done detection never fires.
Fix this by introducing a MBOX_NO_MSG sentinel value that means
"no active request," freeing NULL to be valid message data. The
sentinel is defined in the subsystem-internal mailbox.h so that
controller drivers within drivers/mailbox/ can reference it, but
it is not exposed to clients outside the subsystem.
Fifteen in-tree callers send NULL (doorbell-style IPCs on Qualcomm,
Tegra, TI, Xilinx, i.MX, SCMI, and PCC platforms). All were
audited for regression:
- Most already work around the bug via knows_txdone=true with a
manual mbox_client_txdone() call, making the framework's
tracking irrelevant. These are unaffected.
- Poll-based callers (Xilinx zynqmp/r5) are strictly better off:
the poll timer now correctly detects NULL-active channels
instead of silently skipping them.
- irq-qcom-mpm.c was a pre-existing bug -- the only Qualcomm
caller that omitted the knows_txdone + mbox_client_txdone()
pattern. Fixed in a companion commit ("irqchip/qcom-mpm: Fix
missing mailbox TX done acknowledgment").
- No caller sets both a tx_done callback and sends NULL, nor
combines tx_block=true with NULL sends, so the newly reachable
callback/completion paths are never exercised.
Also update tegra-hsp's flush callback, which directly inspects
active_req to wait for the channel to drain: the old "!= NULL"
check becomes "!= MBOX_NO_MSG", otherwise flush spins until
timeout since the sentinel is non-NULL.
The only tradeoff is that 'MBOX_NO_MSG' can not be used as a message
by clients.
Reported-by: Joonwon Kang <joonwonkang@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3549a9649dc7c5fc586ab12f675279283cdcb2a7 ] We are observing following warnings: *ERROR* power well DC_off state mismatch (refcount 0/enabled 1) gen9_dc_off_power_well_enabled is considering target state DC_STATE_DISABLE as DC_OFF power well being enabled. Fix this by using wakeref for the purpose. To achieve this we need to modify notification code as well. Currently it is possible that PSR gets notified vblank enable/disable twice on same status. This is currently not a problem as it is just triggering call to intel_display_power_set_target_dc_state with same target state as a parameter. When using wakeref this becomes a problem due to reference counting. Fix this storing vbank status on last notification and use that to ensure there are no more than one notification with same vblank status. v2: ensure there is no subsequent notifications with same status Fixes: aa451ab ("drm/i915/display: Prevent DC6 while vblank is enabled for Panel Replay") Cc: <stable@vger.kernel.org> # v6.13+ Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> Link: https://patch.msgid.link/20260520104944.239797-2-jouni.hogander@intel.com (cherry picked from commit 35485ac56d878192a3829a58cb26503125ec7104) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 928abe19fbf0127003abcb1ea69cabc1c897d0ab ] A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. Fixes: cdae7c0 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1e280334b7f0a1df441e08bd1f6a1bcc36b3bbb upstream. There is no good reason to have wBytesPerInterval < wMaxPacketSize - either one is too low or the other too high, and we may want to warn about such descriptors. Start with cleaning up our own root hubs. USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize from its former value of 4, which was derived from USB 2.0 spec and the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2 10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports. Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbf5df34a4dbcd09d433dd4f0916bf9b2ddb16de upstream. Using definitions in kernel policies is awkward right now. On one hand we want defines for max values and such. On the other we don't have a way of adding kernel-only defines. Adding unnecessary defines to uAPI is a bad idea, we won't be able to delete them. And when it comes to policy user space should just query it via the policy dump, not use hard coded defines. Add a "scope" property to definitions, which will let us tell the codegen that a definition is for kernel use only. Support following values: - uapi: render into the uAPI header (default, today's behavior) - kernel: render to kernel header only - user: same as kernel but for the user-side generated header Definitions may have a header property (definition is "external", provided by existing header). Extend the scope to headers, too. If definition has both scope and header properties we will only generate the includes in the right scope. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20260510192904.3987113-8-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…he erased entry commit 13031fb6b8357fbbcded2a7f4cba73e4781ee594 upstream. vgic_its_invalidate_cache() walks the per-ITS translation cache with xa_for_each() and drops the cache's reference on each entry with vgic_put_irq(). It puts the iterated pointer, though, rather than the value returned by xa_erase(). The function is called from contexts that do not exclude one another: the ITS command handlers hold its_lock, the GITS_CTLR write path holds cmd_lock, and the path that clears EnableLPIs in a redistributor's GICR_CTLR holds neither. Two or more of them can drain the same cache concurrently, and if each one observes the same entry, erases it and then puts it, the single reference the cache holds on that entry is dropped more than once. The entry can then be freed while an ITE still maps it. xa_erase() is atomic and returns the previous entry, so put only the entry that this context actually removed. The cache reference is then dropped exactly once per entry even when the invalidations run concurrently, and the behavior is unchanged when only one context runs. Fixes: 8201d10 ("KVM: arm64: vgic-its: Maintain a translation cache per ITS") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/ah2c5lu4JbUg7dj-@v4bel Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70543358fa08e0f7cebc3447c3b70fe97ad7aaa8 upstream. kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which can run at any time. kvm_vcpu_init_nested() reallocates the array and frees the old buffer while holding only kvm->arch.config_lock, so such a walker can reference the freed array. Allocate the new array outside of mmu_lock, as the allocation can sleep. Under the lock, copy the existing entries, fix up the back pointers and reassign the array. Free the old buffer after dropping the lock, as kvfree() can sleep as well. Fixes: 4f128f8 ("KVM: arm64: nv: Support multiple nested Stage-2 mmu structures") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Oliver Upton <oupton@kernel.org> Link: https://patch.msgid.link/aiKIVVeIr1aAB1yp@v4bel Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger,kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260607095727.528828913@linuxfoundation.org Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Wentao Guan <guanwentao@uniontech.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 6.18.35 stable release Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
bugclerk
changed the title
yocalebo
approved these changes
Jun 10, 2026
amotin
approved these changes
Jun 10, 2026
|
This PR has been merged and conversations have been locked. |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Testing