Skip to content

Add Thermo Nunc OmniTray 264728 1-well plate labware - #57

Draft
kingbedjed wants to merge 2 commits into
mainfrom
labware/thermo-nunc-264728
Draft

kingbedjed wants to merge 2 commits into
mainfrom
labware/thermo-nunc-264728

Conversation

@kingbedjed

Copy link
Copy Markdown
Contributor

The request

Slack #labware-requests (C0BT14F1GTF), user U0APRMP9RH8, 2026-11-13:
https://ramonaoptics.slack.com/archives/C0BT14F1GTF/p1794599851078359?thread_ts=1794599851.078359&cid=C0BT14F1GTF

Thermo 264728 omniwell plate

Closes #56

Decisions needed

  • "omniwell" vs OmniTray. Thermo has no "OmniWell" under 264728. The catalog calls 264728 the Nunc OmniTray Single-Well Plate, Untreated (notched, sterile, 90/case). This PR registers that. The requester is asked to confirm it is what they have.
  • A second entry for a mould already in the registry. 264728 is on the same dimension block of PSS 165218 as Thermo_nunc_165218_1_well_plate.json (the Nunclon Delta treated OmniTray), so its geometry is identical. Only name, part_number, web_reference, last_updated, surface_treatments (untreated) and the opening of notes differ. The alternative is to close this and point the requester at 165218. I went with per-catalog-number entries so the plate can be found by the number on the box.
  • Floor thickness is not published (the working-distance number), and neither are the compartment's inside dimensions. Both are handled exactly as in 165218: the thickness is left out, and the compartment is derived from the 84 cm² culture area. A measurement off a tray in hand would settle both.

What is included

file plate pitch grid bottom
Thermo_nunc_264728_1_well_plate.json Thermo Nunc OmniTray 264728 1 well 85.47 mm (plate width; single well) 1 × 1 rectangle 115.3 × 72.9 mm (derived), flat, clear PS, untreated, thickness not published

Figures

rendered from the JSON on this branch vendor
Thermo Nunc OmniTray 264728 as the JSON describes it Thermo PSS 165218 OMNITRAY rev 1015, page 1 PSS 165218 rev 1015, page 1, which lists 264728 in its catalog table
Thermo Nunc OmniTray product photo Product photo from the 264728 catalog page

Sources used

  • Thermo Fisher PSS 165218 OMNITRAY, rev 1015 (2015-10-21), the drawing_reference. One dimension block covers 165218, 242811, 264728 (clear, 10/90) and 465219. It is stamped NOT TO SCALE, so nothing was scaled off it.
  • Catalog page for 264728, the web_reference: untreated, sterile, lid, "Microplate dimension with 2 notched corners", 35 mL working and 90 mL capacity. These agree with the PSS.
  • Trap, carried over from 165218: the catalog's "Height 32 mm" is the PSS's stacked height of two trays with lids, not the tray height (14.5 mm).
  • 264728 is not the non-notched OmniTray mould (140156 / 267060, PSS 140156), which has a larger compartment.

Judgement calls

These are all inherited unchanged from Thermo_nunc_165218_1_well_plate.json and are documented in full in notes:

  • The compartment floor of 115.3 mm (along the plate's length, width) by 72.9 mm (along the plate's width, height) is derived from the printed 84 cm² culture area as a uniform inset from the printed 123.7 × 81.3 mm body. diameter repeats the shorter side, 72.9 mm.
  • floor_height 2.8 mm = tray height F − well depth G, both printed.
  • skirt_thickness and upper_outline are derived from printed A/B and C/D.
  • pitch is the plate width, because there is one well.
  • bottom_thickness and bottom_elevation are not recorded, because Thermo does not publish them.

Testing

  • pytest -q: 192 passed. The new file has its own row in test_plate_definition_files_can_be_loaded.
  • lint (CI's pixi command: ruff 0.15.22 check and format, ty 0.0.74): all checks passed.
  • Geometry check:
Thermo_nunc_264728_1_well_plate.json
  name            'Thermo Nunc OmniTray 264728 1 well'   part '264728'
  footprint       127.760 mm x 85.470 mm x 14.500 mm
  grid            1 rows x 1 cols, pitch 85.470 mm
  well            rectangle, 115.300 mm x 72.900 mm, 11.700 mm deep, flat bottom
  A1 centre       63.880 mm from left, 42.735 mm from top
  far margins     63.880 mm right, 42.735 mm bottom
  centred A1      63.880 mm / 42.735 mm  (delta 0.000 mm / 0.000 mm)
  ok

🤖 Generated with Claude Code

Opened by the add-labware skill of ramona-claude 0.24.2 (ramona-llm ee2d4a6+dirty, prompt bc769991).

This branch has not been deployed

No deployments
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

Add Thermo Nunc OmniTray 264728 1-well plate to the labware registry

2 participants