Official appliance operating system overlay for Nouride Box on ARM Single Board Computers (SBCs) and TV boxes, including Orange Pi Zero 2 / 3 (Allwinner H616/H618) and Amlogic S905X2 (e.g. ZTE B860H v5.0).
Nouride OS does not fork the Armbian kernel repository. Instead, it uses Armbian's official external userpatches/ overlay architecture. All device tree compilation, upstream Linux kernel security patches, and bootloader (U-Boot) toolchains are inherited directly from pinned Armbian releases (compile.sh docker), while Nouride-specific hardening and daemon payloads are baked via chroot hooks.
- Flash Storage Hardening:
systemd-journaldconfigured withStorage=volatile(logs in RAM, zero MicroSD/eMMC wear).- Zero swap to physical flash; dynamic compressed RAM swap via
systemd-zram-generator(zram). - Nightly SQLite backup rotation and flash-safe autocheckpoints.
- Clock & NTP Synchronization:
fake-hwclockinstalled andsystemd-time-wait-syncenabled (STBs lack RTC hardware; prevents clock regressions from misfiring scheduled cron jobs).
- Network & Provisioning:
NetworkManagerexclusively for network management.- Built-in Wi-Fi Access Point fallback for zero-terminal smartphone onboarding (
Nouride-Setup-XXXX).
- Daemon Lifecycle:
- Dedicated unprivileged system user
nouride(/srv/nouride). - Hardened
nouride.servicesystemd unit with auto-restart, cgroup memory limits (MemoryHigh), and security sandboxing.
- Dedicated unprivileged system user
Note on Raspberry Pi Zero 2 W: Raspberry Pi Zero 2 W is not built via Armbian. It uses the official Raspberry Pi OS Lite 64-bit pipeline with cloud-init injection implemented in
nouride/internals/pro/build-pro/flash/.
| Target Preset | SoC / Architecture | Target Hardware | Supported By |
|---|---|---|---|
aml-s9xx-box |
Amlogic S905X2 (ARM64) | ZTE B860H v5.0, HG680P, X96 Max | Armbian Community |
orangepi-zero3 |
Allwinner H618 (ARM64) | Orange Pi Zero 3 (1GB / 2GB / 4GB) | Armbian Official (Tier 1) |
orangepi-zero2 |
Allwinner H616 (ARM64) | Orange Pi Zero 2 (1GB) | Armbian Official (Tier 1) |
Building Nouride OS requires Docker on any Linux x86_64 host or macOS.
# Build for Amlogic S905X2 TV Box (ZTE B860H)
./build.sh aml-s9xx-box
# Build for Orange Pi Zero 3
./build.sh orangepi-zero3
# Build for Orange Pi Zero 2
./build.sh orangepi-zero2The script will:
- Clone
armbian/buildpinned to release tagv26.2.1intoarmbian-build/if not present. - Mount
userpatches/and board configs into the Armbian Docker container. - Build the minimal Debian 13 (Trixie) image.
- Execute
userpatches/customize-image.shinside chroot to install the Nouride daemon and configure hardening. - Output the ready-to-flash compressed image (
.img.xz) and SHA256 checksum tooutput/images/.
Burn the output image to a MicroSD card using dd, Raspberry Pi Imager, or BalenaEtcher:
xz -dc output/images/nouride-os-*.img.xz | sudo dd of=/dev/sdX bs=4M status=progress conv=fsyncnouride-os/
├── README.md
├── build.sh # One-command Docker build entrypoint
├── configs/ # Board preset configurations
│ ├── aml-s9xx-box.conf # Amlogic TV Box (S905X2 / B860H)
│ ├── orangepi-zero2.conf # Orange Pi Zero 2 (H616)
│ └── orangepi-zero3.conf # Orange Pi Zero 3 (H618)
└── userpatches/ # Armbian build overlay
├── config-default.conf # Global minimal OS build flags
├── customize-image.sh # Chroot hook: hardening, daemon install, services
└── overlay/ # Files copied verbatim to rootfs
└── etc/
├── issue # Pre-login console banner
├── motd # Post-login SSH banner
└── systemd/system/
└── nouride.service # Hardened systemd daemon unit