ESP32 bridge for ResMed AirSense 10 CPAP.
Using an AirSense 11? See AirCANnect.
- Web UI - configure therapy settings, view sleep reports, live pressure/flow waveforms, and manage oximeters.
- SD recording and export - records therapy in Air10 EDF format and synchronizes files to SMB and SleepHQ on SD-capable hardware.
- Oximetry - feeds SpO2/pulse into AirSense for native SAD.edf recording. BLE (Nonin 3150, O2Ring, O2Ring-S, Checkme O2, WS20A, generic PLX/HR sensors) and UDP for integrating unsupported devices.
- ResMed firmware - upload and flash firmware over WiFi; keep images and save firmware dumps on SD-capable hardware.
- TCP-UART bridge - send commands to AirSense over WiFi.
Follow the Quick Start to wire and flash your board.
On a fresh installation, connect to its airbridge_... WiFi network
(password airbridge), open http://192.168.4.1/, and complete the setup wizard.
Default Web UI login: admin / airbridge.
airbreak-plus contains Python tools for direct serial/TCP interaction:
python/resmed_flash.py -p tcp:airbridge- flash AirSense firmwarepython/resmed_config.py -p tcp:airbridge- read/write AirSense settings
Both support serial (-p /dev/ttyUSB0) and TCP (-p tcp:hostname) with --tcp-mode=raw|transparent|text.
| Dashboard | Edf Sync | Charts |
|---|---|---|
 |
 |
 |
| Sleep Report | Clinical Settings | Oximetry |
|---|---|---|
 |
 |
 |
GPL v3. See LICENSE.