Skip to content
Open
Changes from 4 commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
139 changes: 139 additions & 0 deletions configs/AXFL/BBH743/config.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,139 @@
/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#define FC_TARGET_MCU STM32H743

#define BOARD_NAME BBH743
#define MANUFACTURER_ID AXFL

#define SYSTEM_HSE_MHZ 8

#define USE_ACC
#define USE_GYRO
// Gyro 1: ICM-42688-P on SPI4. Gyro 2: LSM6DSK320X footprint on SPI3, not fitted by default.
#define USE_ACC_SPI_ICM42688P
#define USE_GYRO_SPI_ICM42688P
#define USE_ACCGYRO_LSM6DSK320X
#define USE_ACCGYRO_IIM42652

#define USE_BARO
#define USE_BARO_DPS310

#define USE_FLASH
#define USE_FLASH_W25Q128FV

// OSD: MSP DisplayPort on UART7. Bluetooth module on UART8.
#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART7

Copy link
Copy Markdown
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

This is not compatible with analog

Copy link
Copy Markdown
Member Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

why is that not compatible?

Copy link
Copy Markdown
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Perhaps guard with #ifdef USE_OSD_HD block.

Copy link
Copy Markdown
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Imo it is not a compatible setting when using analog - like SA / TRAMP.

#define MSP_UART SERIAL_PORT_UART8

// Passive buzzer, NPN driven, active high
#define BEEPER_PIN PB0
#define BEEPER_PWM_HZ 2500

#define MOTOR1_PIN PE13
#define MOTOR2_PIN PE14
#define MOTOR3_PIN PE9
#define MOTOR4_PIN PE11

#define PINIO1_PIN PD12
#define PINIO1_BOX 40
#define PINIO2_PIN PC14
#define PINIO2_BOX 41
Comment on lines +60 to +63

Copy link
Copy Markdown
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Suggest adding names for the PINIO boxes

#define CAMERA_CONTROL_PIN PD15

#define UART1_TX_PIN PA9
#define UART1_RX_PIN PA10
#define UART2_TX_PIN PD5
#define UART2_RX_PIN PD6
#define UART3_TX_PIN PD8
#define UART3_RX_PIN PD9
#define UART4_TX_PIN PA0
#define UART4_RX_PIN PA1
#define UART5_TX_PIN PB6
#define UART5_RX_PIN PB5
#define UART6_TX_PIN PC6
#define UART6_RX_PIN PC7
#define UART7_TX_PIN PE8
#define UART7_RX_PIN PE7
#define UART8_TX_PIN PE1
#define UART8_RX_PIN PE0

#define I2C2_SCL_PIN PB10
#define I2C2_SDA_PIN PB11
#define I2C3_SCL_PIN PA8
#define I2C3_SDA_PIN PC9

#define LED0_PIN PD0

#define SPI2_SCK_PIN PB13
#define SPI2_SDI_PIN PB14
#define SPI2_SDO_PIN PB15
#define SPI3_SCK_PIN PC10
#define SPI3_SDI_PIN PC11
#define SPI3_SDO_PIN PC12
#define SPI4_SCK_PIN PE2
#define SPI4_SDI_PIN PE5
#define SPI4_SDO_PIN PE6

#define ADC_VBAT_PIN PC3
#define ADC_CURR_PIN PC2

#define FLASH_SPI_INSTANCE SPI2
#define FLASH_CS_PIN PB4

#define GYRO_1_SPI_INSTANCE SPI4
#define GYRO_1_CS_PIN PE4
#define GYRO_1_EXTI_PIN PC4
#define GYRO_1_ALIGN CW0_DEG
#define GYRO_2_SPI_INSTANCE SPI3
#define GYRO_2_CS_PIN PB12
#define GYRO_2_EXTI_PIN PB7
#define GYRO_2_ALIGN CW0_DEG

#define USE_GYRO_CLKIN
#define GYRO_1_CLKIN_PIN PA5
// Gyro 2 CLKIN net. Not driven yet: gyrodev.c "CLKIN gyro 2 on separate pin is not supported yet".
#define GYRO_2_CLKIN_PIN PA6

// Motors: TIM1 CH3/CH4/CH1/CH2. Beeper: TIM3_CH3. CLKIN: TIM2_CH1, TIM13_CH1. Camera control: TIM4_CH4.
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, PE13, 1, 0) \
TIMER_PIN_MAP( 1, PE14, 1, 1) \
TIMER_PIN_MAP( 2, PE9, 1, 2) \
TIMER_PIN_MAP( 3, PE11, 1, 3) \
TIMER_PIN_MAP( 4, PB0, 2, -1) \
TIMER_PIN_MAP( 5, PA5, 1, -1) \
TIMER_PIN_MAP( 6, PA6, 2, -1) \
TIMER_PIN_MAP( 7, PD15, 1, -1)

#define ADC1_DMA_OPT 8
#define ADC3_DMA_OPT 9
#define TIMUP1_DMA_OPT 10

#define BARO_I2C_INSTANCE I2CDEV_2
#define MAG_I2C_INSTANCE I2CDEV_3

#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_CURRENT_METER_SCALE 80
Loading