Add files via upload

sketch_nov04a.ino

@@ -0,0 +1,85 @@
+
+
+
+#include <ESP8266WiFi.h>
+#include <FirebaseArduino.h>
+
+#define WIFI_SSID "MorningBrew"
+#define WIFI_PASSWORD ""
+
+#define FIREBASE_HOST "paperless-e44e7.firebaseio.com"
+#define FIREBASE_AUTH "dxE1iwlfO1eydoipzWvs8pSwLcS25UhhTr3PV4IM"
+
+// constants
+const int button_pin = 2;
+
+// variables
+int button_state;
+String button_position = "Unpressed";
+int pushes = 0;
+
+void setup() {
+  // put your setup code here, to run once:
+
+  Serial.begin(115200);
+  delay(10);
+
+  // We start by connecting to a WiFi network
+  Serial.println();
+  Serial.println();
+  Serial.print("Connecting to ");
+  Serial.println(WIFI_SSID);
+
+  // connect to wifi.
+  WiFi.begin(WIFI_SSID , WIFI_PASSWORD);
+  Serial.print("connecting");
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.print(".");
+    delay(500);
+  }
+  Serial.println();
+  Serial.print("connected: ");
+  Serial.println(WiFi.localIP());
+
+  Firebase.begin(FIREBASE_HOST, FIREBASE_AUTH);
+
+  //set pins
+  pinMode(button_pin, INPUT);   //  initializes button pin as input
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+  button_state = digitalRead(button_pin);   //  reads button state
+  Serial.print("Pushes = ");
+  Serial.print(pushes);
+  Serial.print(" ");
+  Serial.print("Button Position = ");
+  Serial.print(button_position);
+  Serial.print(" ");
+
+  if (button_state == HIGH) {
+    if (button_position == "Pressed") {
+      pushes ++;
+    }
+    button_position = "Unpressed";
+    Serial.print("Button State HIGH\n");
+  }
+
+  if (button_state == LOW) {
+    button_position = "Pressed";
+    Serial.print("Button State LOW\n");
+  }
+
+    if(n < 3 )
+  {
+    n++;
+    Serial.println("Test");
+
+    Firebase.pushString("button", "Tell me if this worked " + (n));
+    // handle error
+    if (Firebase.failed()) {
+        Serial.print("setting /number failed:");
+        Serial.println(Firebase.error());  
+        return;
+  }
+}