Inverter no data. Batteries and Powersensor OK

[flrnwrzl]

I have latest huawei solar integration 3.0.7. i can connect with ip adress but i get only battery and powersensor values. for invertion its not avaliable

for the firmware versions:
Inverter SUN200-8KTL-M1: V100R001C00SPC168 (SPC177 latest)
Dongle SDongleA-05: V200R022C10SPC121 (SPC320 latest)
Battery Luna 2000 10KW V100R002C00SPC627 (SPC643 latest)

The log says:
Dieser Fehler stammt von einer benutzerdefinierten Integration

Logger: custom_components.huawei_solar.update_coordinator
Quelle: custom_components/huawei_solar/update_coordinator.py:77
Integration: Huawei Solar (Dokumentation, Probleme)
Erstmals aufgetreten: 13:21:23 (113 Vorkommnisse)
Zuletzt protokolliert: 14:20:16

Device BT2240102870 reported an illegal address error during a batch update. This likely means the library is querying a register that is not supported by your specific device. To find the culprit: systematically disable sensors one by one in Home Assistant, wait at least 30 seconds after each change, and check whether the error disappears. Please report the offending sensor to the integration maintainers.

as far as i noticed in some other cases in combination with evcc there was a change in modbus registers. could this be connected?