mLRS allows for an OLED display to be connected to a Tx module (128x64, SSD1306 using I2C). When paired with a 5-way joystick (4 directions + select) this allows for one to update parameters and display link statistics. The OLED is particularly useful on radios that do not have a color screen and cannot utilize the color Lua script.
From the main screen, you can navigate through the 4 main screens using the up and down directions. These contain the following information:
| Main | Main/2 | Main/3 | Main/4 |
|---|---|---|---|
| Config ID | Config ID | Config ID | Config ID |
| Mode | Mode | Tx, Rx data rate | Tx, Rx hardware |
| Tx, Rx output power | Sensitivity | Tx, Rx active antenna | Tx, Rx firmware version |
| Tx, Rx Rssi | Tx, Rx output power | Wireless Bridge SSID | |
| Tx, Rx LQ | Tx, Rx diversity mode | ||
 |
 |
 |
 |
From the main screen, you can navigate through the setting and action screens using the right and left directions. These contain the following settings:
| Common | Tx | Rx | Actions |
|---|---|---|---|
| Config ID | Config ID | Config ID | Config ID |
| Bind Phrase | Power | Power | Store |
| Mode | Diversity | Diversity | Bind |
| Band | Ch Source | Ch Order | Boot |
| 2.4 Channel Exclusion | Ch Order | Out Mode | FLASH ESP |
| In Mode | Failsafe Mode | ||
| Ser Dest | Ser Port | ||
| Ser Baudrate | Ser Baudrate | ||
| Snd RadioStat | Ser Link Mode | ||
| Mav Component | Mav System ID | ||
| Power Sw Ch | Snd RadioStat | ||
| Buzzer | Snd RcChannel | ||
| Wifi Protocol | Out Rssi Ch | ||
| Wifi Channel | Out LQ Ch | ||
| Wifi Power | Power Sw Ch | ||
| FS Ch1-16 | |||
 |
 |
 |
 |