Joyhub Marino

[kacperdev21]

Not listed anywhere on the iost index, must be a new toy. amazon link: https://amzn.eu/d/01Wm10rE its got sucking and thrusting+rotate, which is the same as like 5 other toys from joyhub so it shouldnt be too hard. lmk if you need anything, i have the joyhub app aswell if that helps. already tried with intiface and it doesnt find it, could just be connecting wrong though idk

[blackspherefollower]

Could you send over a screenshot of the DIY screen in the JoyHub app. There's a couple more steps, but I'll need that first.

[kacperdev21]

[blackspherefollower]

Perfect. Next we need to work out which index maps to the vibration level, then we need to work out which suction mode the toy uses. Can you follow the steps here: #633 (comment) (the 2 suction modes are a few comments down)

I'll also need to know the BLE name of the device (from nRF's scanner page, as the tab header is all caps and the matcher is case sensitive)

[kacperdev21]

Is this good?:

a003ff000000aa - enables rotation
a00300ff0000aa - disabled rotation
a0030000ff00aa, a003000000ffaa, a00300000000aa - all do nothing

a00d000007ff and a00d000000ff - nothing
a007010007ff - suction on, mode 1
a007000000ff - suction off

Device name - J-Marino

[blackspherefollower]

Perfect

[blackspherefollower]

Try dropping https://raw.githubusercontent.com/blackspherefollower/buttplug-rs/e3997bd5fda22c643897b1b5aafe11c986efdcc8/crates/buttplug_server_device_config/build-config/buttplug-device-config-v5.json into C:\Users\<username>\AppData\Roaming\com.nonpolynomial\intiface_central\config and restarting Intiface

[kacperdev21]

Works as intended, idk if it's worth noting but due to the nature of the rotation, it's a little janky/useless at slower speeds, meaning instead of moving linearly up and down slowly, it'll move then stop repeatedly

[blackspherefollower]

Yeah, the protocol gives pretty much full PWD control, but the hardware can often stall at the lower speeds. If you stop Intiface, you can see the minimum level in the devices tab.

[Wudinski]

Is there a method to fix this in on android to?

[blackspherefollower]

Support is already in and rolled out (to android too)