From a67bd1388f9d25ced1046308ae74c5a7d3e30234 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Fri, 6 Nov 2026 15:14:24 +0800 Subject: [PATCH 01/15] Create ZTWH743 --- configs/ZTWH743 | 165 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 configs/ZTWH743 diff --git a/configs/ZTWH743 b/configs/ZTWH743 new file mode 100644 index 000000000..41ed271be --- /dev/null +++ b/configs/ZTWH743 @@ -0,0 +1,165 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + + /* + SUPPORTED TARGET - THANK YOU + REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 + DATE: 2026-05-01 +*/ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME ZTWH743 +#define MANUFACTURER_ID ZTWF + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P + +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 + +#ifndef USE_MAG +#define USE_MAG +#define USE_MAG_QMC5883L +#define USE_MAG_IST8310 +#endif + +#define BEEPER_PIN PC2 +#define MOTOR1_PIN PA0 +#define MOTOR2_PIN PA1 +#define MOTOR3_PIN PA2 +#define MOTOR4_PIN PA3 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PD14 +#define MOTOR8_PIN PD15 +#define LED_STRIP_PIN PE9 +#define SERVO1_PIN PE5 // S9 +#define SERVO2_PIN PE6 // S10 +#define SERVO3_PIN PC8 // S11 +#define SERVO4_PIN PC9 // S12 +#define UART1_TX_PIN PA9 +#define UART1_RX_PIN PA10 +#define UART2_TX_PIN PD5 +#define UART2_RX_PIN PD6 +#define UART3_TX_PIN PD8 +#define UART3_RX_PIN PD9 +#define UART4_TX_PIN PD1 +#define UART4_RX_PIN PD0 +#define UART5_TX_PIN PB6 +#define UART5_RX_PIN PB5 +#define UART6_TX_PIN PC6 +#define UART6_RX_PIN PC7 +#define UART7_TX_PIN PE8 +#define UART7_RX_PIN PE7 +#define UART8_TX_PIN PE1 +#define UART8_RX_PIN PE0 +#define I2C2_SCL_PIN PB10 +#define I2C2_SDA_PIN PB11 +#define LED0_PIN PB3 +#define LED1_PIN PB4 +#define SPI1_SCK_PIN PA5 +#define SPI1_SDI_PIN PA6 +#define SPI1_SDO_PIN PA7 +#define SPI2_SCK_PIN PB13 +#define SPI2_SDI_PIN PB14 +#define SPI2_SDO_PIN PB15 +#define SPI3_SCK_PIN PC10 +#define SPI3_SDI_PIN PC11 +#define SPI3_SDO_PIN PC12 +#define SPI4_SCK_PIN PE12 +#define SPI4_SDI_PIN PE13 +#define SPI4_SDO_PIN PE14 +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define PINIO1_PIN PE2 +#define PINIO2_PIN PE3 +#define FLASH_CS_PIN PC13 +#define MAX7456_SPI_CS_PIN PD2 +#define GYRO_1_EXTI_PIN PC4 +#define GYRO_1_CS_PIN PB7 +#define GYRO_2_EXTI_PIN PB2 +#define GYRO_2_CS_PIN PB8 + +#define USE_GYRO_CLKIN +#define GYRO_1_CLKIN_PIN PB9 +#define GYRO_2_CLKIN_PIN PB9 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, PA0, 1, 0) \ + TIMER_PIN_MAP( 1, PA1, 1, 1) \ + TIMER_PIN_MAP( 2, PA2, 1, 2) \ + TIMER_PIN_MAP( 3, PA3, 1, 3) \ + TIMER_PIN_MAP( 4, PD12, 1, 4) \ + TIMER_PIN_MAP( 5, PD13, 1, 5) \ + TIMER_PIN_MAP( 6, PD14, 1, 6) \ + TIMER_PIN_MAP( 7, PD15, 1, 7) \ + TIMER_PIN_MAP( 8, PE5, 1, -1) \ + TIMER_PIN_MAP( 9, PE6, 1, -1) \ + TIMER_PIN_MAP( 10, PC8, 1, -1) \ + TIMER_PIN_MAP( 11, PC9, 1, -1) \ + TIMER_PIN_MAP( 12, PB9, 1, -1) \ + TIMER_PIN_MAP( 13, PE9 , 1, 8) + +#define ADC1_DMA_OPT 9 +#define ADC3_DMA_OPT 10 + +#define FLASH_SPI_INSTANCE SPI3 +#define MAX7456_SPI_INSTANCE SPI2 + +#define BARO_I2C_INSTANCE I2CDEV_2 +#define MAG_I2C_INSTANCE I2CDEV_2 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC + +#define DEFAULT_CURRENT_METER_SCALE 120 +#define DEFAULT_VOLTAGE_METER_SCALE 210 + +#define BEEPER_INVERTED + +#define PINIO1_BOX 40 +#define BOX_USER1_NAME "CAM 1,2" +#define PINIO2_BOX 41 +#define BOX_USER2_NAME "12V BEC" + +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW270_DEG +#define GYRO_2_SPI_INSTANCE SPI4 +#define GYRO_2_ALIGN CW0_DEG + +#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH +#define ENSURE_MPU_DATA_READY_IS_LOW + +#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 +#define GPS_UART SERIAL_PORT_USART6 +#define ESC_SENSOR_UART SERIAL_PORT_USART8 + From 8e97017144d3e0556802ec06adaecf1cad0563d3 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Fri, 6 Nov 2026 15:17:37 +0800 Subject: [PATCH 02/15] Create ZTWH743 --- configs/ZTWF/ZTWH743 | 165 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 configs/ZTWF/ZTWH743 diff --git a/configs/ZTWF/ZTWH743 b/configs/ZTWF/ZTWH743 new file mode 100644 index 000000000..41ed271be --- /dev/null +++ b/configs/ZTWF/ZTWH743 @@ -0,0 +1,165 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + + /* + SUPPORTED TARGET - THANK YOU + REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 + DATE: 2026-05-01 +*/ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME ZTWH743 +#define MANUFACTURER_ID ZTWF + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P + +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 + +#ifndef USE_MAG +#define USE_MAG +#define USE_MAG_QMC5883L +#define USE_MAG_IST8310 +#endif + +#define BEEPER_PIN PC2 +#define MOTOR1_PIN PA0 +#define MOTOR2_PIN PA1 +#define MOTOR3_PIN PA2 +#define MOTOR4_PIN PA3 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PD14 +#define MOTOR8_PIN PD15 +#define LED_STRIP_PIN PE9 +#define SERVO1_PIN PE5 // S9 +#define SERVO2_PIN PE6 // S10 +#define SERVO3_PIN PC8 // S11 +#define SERVO4_PIN PC9 // S12 +#define UART1_TX_PIN PA9 +#define UART1_RX_PIN PA10 +#define UART2_TX_PIN PD5 +#define UART2_RX_PIN PD6 +#define UART3_TX_PIN PD8 +#define UART3_RX_PIN PD9 +#define UART4_TX_PIN PD1 +#define UART4_RX_PIN PD0 +#define UART5_TX_PIN PB6 +#define UART5_RX_PIN PB5 +#define UART6_TX_PIN PC6 +#define UART6_RX_PIN PC7 +#define UART7_TX_PIN PE8 +#define UART7_RX_PIN PE7 +#define UART8_TX_PIN PE1 +#define UART8_RX_PIN PE0 +#define I2C2_SCL_PIN PB10 +#define I2C2_SDA_PIN PB11 +#define LED0_PIN PB3 +#define LED1_PIN PB4 +#define SPI1_SCK_PIN PA5 +#define SPI1_SDI_PIN PA6 +#define SPI1_SDO_PIN PA7 +#define SPI2_SCK_PIN PB13 +#define SPI2_SDI_PIN PB14 +#define SPI2_SDO_PIN PB15 +#define SPI3_SCK_PIN PC10 +#define SPI3_SDI_PIN PC11 +#define SPI3_SDO_PIN PC12 +#define SPI4_SCK_PIN PE12 +#define SPI4_SDI_PIN PE13 +#define SPI4_SDO_PIN PE14 +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define PINIO1_PIN PE2 +#define PINIO2_PIN PE3 +#define FLASH_CS_PIN PC13 +#define MAX7456_SPI_CS_PIN PD2 +#define GYRO_1_EXTI_PIN PC4 +#define GYRO_1_CS_PIN PB7 +#define GYRO_2_EXTI_PIN PB2 +#define GYRO_2_CS_PIN PB8 + +#define USE_GYRO_CLKIN +#define GYRO_1_CLKIN_PIN PB9 +#define GYRO_2_CLKIN_PIN PB9 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, PA0, 1, 0) \ + TIMER_PIN_MAP( 1, PA1, 1, 1) \ + TIMER_PIN_MAP( 2, PA2, 1, 2) \ + TIMER_PIN_MAP( 3, PA3, 1, 3) \ + TIMER_PIN_MAP( 4, PD12, 1, 4) \ + TIMER_PIN_MAP( 5, PD13, 1, 5) \ + TIMER_PIN_MAP( 6, PD14, 1, 6) \ + TIMER_PIN_MAP( 7, PD15, 1, 7) \ + TIMER_PIN_MAP( 8, PE5, 1, -1) \ + TIMER_PIN_MAP( 9, PE6, 1, -1) \ + TIMER_PIN_MAP( 10, PC8, 1, -1) \ + TIMER_PIN_MAP( 11, PC9, 1, -1) \ + TIMER_PIN_MAP( 12, PB9, 1, -1) \ + TIMER_PIN_MAP( 13, PE9 , 1, 8) + +#define ADC1_DMA_OPT 9 +#define ADC3_DMA_OPT 10 + +#define FLASH_SPI_INSTANCE SPI3 +#define MAX7456_SPI_INSTANCE SPI2 + +#define BARO_I2C_INSTANCE I2CDEV_2 +#define MAG_I2C_INSTANCE I2CDEV_2 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC + +#define DEFAULT_CURRENT_METER_SCALE 120 +#define DEFAULT_VOLTAGE_METER_SCALE 210 + +#define BEEPER_INVERTED + +#define PINIO1_BOX 40 +#define BOX_USER1_NAME "CAM 1,2" +#define PINIO2_BOX 41 +#define BOX_USER2_NAME "12V BEC" + +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW270_DEG +#define GYRO_2_SPI_INSTANCE SPI4 +#define GYRO_2_ALIGN CW0_DEG + +#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH +#define ENSURE_MPU_DATA_READY_IS_LOW + +#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 +#define GPS_UART SERIAL_PORT_USART6 +#define ESC_SENSOR_UART SERIAL_PORT_USART8 + From d4c9804c8777199c8d4a58485bf20c82414946bd Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Fri, 6 Nov 2026 15:19:00 +0800 Subject: [PATCH 03/15] Delete configs/ZTWH743 --- configs/ZTWH743 | 165 ------------------------------------------------ 1 file changed, 165 deletions(-) delete mode 100644 configs/ZTWH743 diff --git a/configs/ZTWH743 b/configs/ZTWH743 deleted file mode 100644 index 41ed271be..000000000 --- a/configs/ZTWH743 +++ /dev/null @@ -1,165 +0,0 @@ -/* - * This file is part of Betaflight. - * - * Betaflight is free software. You can redistribute this software - * and/or modify this software under the terms of the GNU General - * Public License as published by the Free Software Foundation, - * either version 3 of the License, or (at your option) any later - * version. - * - * Betaflight is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this software. - * - * If not, see . - */ - - /* - SUPPORTED TARGET - THANK YOU - REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 - DATE: 2026-05-01 -*/ - -#pragma once - -#define FC_TARGET_MCU STM32H743 - -#define BOARD_NAME ZTWH743 -#define MANUFACTURER_ID ZTWF - -#define USE_ACC -#define USE_ACC_SPI_ICM42688P -#define USE_GYRO -#define USE_GYRO_SPI_ICM42688P - -#define USE_BARO -#define USE_BARO_BMP280 -#define USE_BARO_DPS310 -#define USE_FLASH -#define USE_FLASH_W25Q128FV -#define USE_MAX7456 - -#ifndef USE_MAG -#define USE_MAG -#define USE_MAG_QMC5883L -#define USE_MAG_IST8310 -#endif - -#define BEEPER_PIN PC2 -#define MOTOR1_PIN PA0 -#define MOTOR2_PIN PA1 -#define MOTOR3_PIN PA2 -#define MOTOR4_PIN PA3 -#define MOTOR5_PIN PD12 -#define MOTOR6_PIN PD13 -#define MOTOR7_PIN PD14 -#define MOTOR8_PIN PD15 -#define LED_STRIP_PIN PE9 -#define SERVO1_PIN PE5 // S9 -#define SERVO2_PIN PE6 // S10 -#define SERVO3_PIN PC8 // S11 -#define SERVO4_PIN PC9 // S12 -#define UART1_TX_PIN PA9 -#define UART1_RX_PIN PA10 -#define UART2_TX_PIN PD5 -#define UART2_RX_PIN PD6 -#define UART3_TX_PIN PD8 -#define UART3_RX_PIN PD9 -#define UART4_TX_PIN PD1 -#define UART4_RX_PIN PD0 -#define UART5_TX_PIN PB6 -#define UART5_RX_PIN PB5 -#define UART6_TX_PIN PC6 -#define UART6_RX_PIN PC7 -#define UART7_TX_PIN PE8 -#define UART7_RX_PIN PE7 -#define UART8_TX_PIN PE1 -#define UART8_RX_PIN PE0 -#define I2C2_SCL_PIN PB10 -#define I2C2_SDA_PIN PB11 -#define LED0_PIN PB3 -#define LED1_PIN PB4 -#define SPI1_SCK_PIN PA5 -#define SPI1_SDI_PIN PA6 -#define SPI1_SDO_PIN PA7 -#define SPI2_SCK_PIN PB13 -#define SPI2_SDI_PIN PB14 -#define SPI2_SDO_PIN PB15 -#define SPI3_SCK_PIN PC10 -#define SPI3_SDI_PIN PC11 -#define SPI3_SDO_PIN PC12 -#define SPI4_SCK_PIN PE12 -#define SPI4_SDI_PIN PE13 -#define SPI4_SDO_PIN PE14 -#define ADC_VBAT_PIN PC0 -#define ADC_CURR_PIN PC1 -#define PINIO1_PIN PE2 -#define PINIO2_PIN PE3 -#define FLASH_CS_PIN PC13 -#define MAX7456_SPI_CS_PIN PD2 -#define GYRO_1_EXTI_PIN PC4 -#define GYRO_1_CS_PIN PB7 -#define GYRO_2_EXTI_PIN PB2 -#define GYRO_2_CS_PIN PB8 - -#define USE_GYRO_CLKIN -#define GYRO_1_CLKIN_PIN PB9 -#define GYRO_2_CLKIN_PIN PB9 - -#define TIMER_PIN_MAPPING \ - TIMER_PIN_MAP( 0, PA0, 1, 0) \ - TIMER_PIN_MAP( 1, PA1, 1, 1) \ - TIMER_PIN_MAP( 2, PA2, 1, 2) \ - TIMER_PIN_MAP( 3, PA3, 1, 3) \ - TIMER_PIN_MAP( 4, PD12, 1, 4) \ - TIMER_PIN_MAP( 5, PD13, 1, 5) \ - TIMER_PIN_MAP( 6, PD14, 1, 6) \ - TIMER_PIN_MAP( 7, PD15, 1, 7) \ - TIMER_PIN_MAP( 8, PE5, 1, -1) \ - TIMER_PIN_MAP( 9, PE6, 1, -1) \ - TIMER_PIN_MAP( 10, PC8, 1, -1) \ - TIMER_PIN_MAP( 11, PC9, 1, -1) \ - TIMER_PIN_MAP( 12, PB9, 1, -1) \ - TIMER_PIN_MAP( 13, PE9 , 1, 8) - -#define ADC1_DMA_OPT 9 -#define ADC3_DMA_OPT 10 - -#define FLASH_SPI_INSTANCE SPI3 -#define MAX7456_SPI_INSTANCE SPI2 - -#define BARO_I2C_INSTANCE I2CDEV_2 -#define MAG_I2C_INSTANCE I2CDEV_2 - -#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH -#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON -#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC -#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC - -#define DEFAULT_CURRENT_METER_SCALE 120 -#define DEFAULT_VOLTAGE_METER_SCALE 210 - -#define BEEPER_INVERTED - -#define PINIO1_BOX 40 -#define BOX_USER1_NAME "CAM 1,2" -#define PINIO2_BOX 41 -#define BOX_USER2_NAME "12V BEC" - -#define GYRO_1_SPI_INSTANCE SPI1 -#define GYRO_1_ALIGN CW270_DEG -#define GYRO_2_SPI_INSTANCE SPI4 -#define GYRO_2_ALIGN CW0_DEG - -#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH -#define ENSURE_MPU_DATA_READY_IS_LOW - -#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 -#define GPS_UART SERIAL_PORT_USART6 -#define ESC_SENSOR_UART SERIAL_PORT_USART8 - From 1be0930efd9cc57bd1b4080ab58a8fbda1d4b7ca Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Mon, 9 Nov 2026 09:30:44 +0800 Subject: [PATCH 04/15] Update Manufacturers.md --- Manufacturers.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Manufacturers.md b/Manufacturers.md index 40ed821b2..a177090e5 100644 --- a/Manufacturers.md +++ b/Manufacturers.md @@ -157,3 +157,4 @@ This is the official list of manufacturer ids (`manufacturer_id` in the target c |ZEEZ|Zeez RC|https://www.zeezrc.com/| |ZERO|Zerodrag|https://zerodrag.in/| |ZEXM|Shenzhen Zexin Future Technology Co., Ltd|http://zexfpv.com/| +|ZTWF|Shenzhen ZTW Model Science & Technology|https://www.ztw-esc.com/| From 3ed99452123bf20c93f829fa99c2c52a31138f21 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Mon, 9 Nov 2026 09:32:57 +0800 Subject: [PATCH 05/15] Update Manufacturers.md --- Manufacturers.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Manufacturers.md b/Manufacturers.md index a177090e5..59dd3871e 100644 --- a/Manufacturers.md +++ b/Manufacturers.md @@ -157,4 +157,4 @@ This is the official list of manufacturer ids (`manufacturer_id` in the target c |ZEEZ|Zeez RC|https://www.zeezrc.com/| |ZERO|Zerodrag|https://zerodrag.in/| |ZEXM|Shenzhen Zexin Future Technology Co., Ltd|http://zexfpv.com/| -|ZTWF|Shenzhen ZTW Model Science & Technology|https://www.ztw-esc.com/| +|ZTWF|Shenzhen ZTW Model Science & Technology Co., Ltd|https://www.ztw-esc.com/| From 70bf118d3646fd70a8d3dedbcc877636fda5253e Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Tue, 10 Nov 2026 09:48:55 +0800 Subject: [PATCH 06/15] Update ZTWH743 config --- configs/ZTWF/ZTWH743 | 8 -------- 1 file changed, 8 deletions(-) diff --git a/configs/ZTWF/ZTWH743 b/configs/ZTWF/ZTWH743 index 41ed271be..cccb2cac1 100644 --- a/configs/ZTWF/ZTWH743 +++ b/configs/ZTWF/ZTWH743 @@ -44,12 +44,6 @@ #define USE_FLASH_W25Q128FV #define USE_MAX7456 -#ifndef USE_MAG -#define USE_MAG -#define USE_MAG_QMC5883L -#define USE_MAG_IST8310 -#endif - #define BEEPER_PIN PC2 #define MOTOR1_PIN PA0 #define MOTOR2_PIN PA1 @@ -157,9 +151,7 @@ #define GYRO_2_ALIGN CW0_DEG #define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH -#define ENSURE_MPU_DATA_READY_IS_LOW #define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 #define GPS_UART SERIAL_PORT_USART6 #define ESC_SENSOR_UART SERIAL_PORT_USART8 - From 450948cd9a16fc8cd22f580b8c793556b191f769 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 16:52:10 +0800 Subject: [PATCH 07/15] Delete configs/ZTWF/ZTWH743 --- configs/ZTWF/ZTWH743 | 157 ------------------------------------------- 1 file changed, 157 deletions(-) delete mode 100644 configs/ZTWF/ZTWH743 diff --git a/configs/ZTWF/ZTWH743 b/configs/ZTWF/ZTWH743 deleted file mode 100644 index cccb2cac1..000000000 --- a/configs/ZTWF/ZTWH743 +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of Betaflight. - * - * Betaflight is free software. You can redistribute this software - * and/or modify this software under the terms of the GNU General - * Public License as published by the Free Software Foundation, - * either version 3 of the License, or (at your option) any later - * version. - * - * Betaflight is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this software. - * - * If not, see . - */ - - /* - SUPPORTED TARGET - THANK YOU - REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 - DATE: 2026-05-01 -*/ - -#pragma once - -#define FC_TARGET_MCU STM32H743 - -#define BOARD_NAME ZTWH743 -#define MANUFACTURER_ID ZTWF - -#define USE_ACC -#define USE_ACC_SPI_ICM42688P -#define USE_GYRO -#define USE_GYRO_SPI_ICM42688P - -#define USE_BARO -#define USE_BARO_BMP280 -#define USE_BARO_DPS310 -#define USE_FLASH -#define USE_FLASH_W25Q128FV -#define USE_MAX7456 - -#define BEEPER_PIN PC2 -#define MOTOR1_PIN PA0 -#define MOTOR2_PIN PA1 -#define MOTOR3_PIN PA2 -#define MOTOR4_PIN PA3 -#define MOTOR5_PIN PD12 -#define MOTOR6_PIN PD13 -#define MOTOR7_PIN PD14 -#define MOTOR8_PIN PD15 -#define LED_STRIP_PIN PE9 -#define SERVO1_PIN PE5 // S9 -#define SERVO2_PIN PE6 // S10 -#define SERVO3_PIN PC8 // S11 -#define SERVO4_PIN PC9 // S12 -#define UART1_TX_PIN PA9 -#define UART1_RX_PIN PA10 -#define UART2_TX_PIN PD5 -#define UART2_RX_PIN PD6 -#define UART3_TX_PIN PD8 -#define UART3_RX_PIN PD9 -#define UART4_TX_PIN PD1 -#define UART4_RX_PIN PD0 -#define UART5_TX_PIN PB6 -#define UART5_RX_PIN PB5 -#define UART6_TX_PIN PC6 -#define UART6_RX_PIN PC7 -#define UART7_TX_PIN PE8 -#define UART7_RX_PIN PE7 -#define UART8_TX_PIN PE1 -#define UART8_RX_PIN PE0 -#define I2C2_SCL_PIN PB10 -#define I2C2_SDA_PIN PB11 -#define LED0_PIN PB3 -#define LED1_PIN PB4 -#define SPI1_SCK_PIN PA5 -#define SPI1_SDI_PIN PA6 -#define SPI1_SDO_PIN PA7 -#define SPI2_SCK_PIN PB13 -#define SPI2_SDI_PIN PB14 -#define SPI2_SDO_PIN PB15 -#define SPI3_SCK_PIN PC10 -#define SPI3_SDI_PIN PC11 -#define SPI3_SDO_PIN PC12 -#define SPI4_SCK_PIN PE12 -#define SPI4_SDI_PIN PE13 -#define SPI4_SDO_PIN PE14 -#define ADC_VBAT_PIN PC0 -#define ADC_CURR_PIN PC1 -#define PINIO1_PIN PE2 -#define PINIO2_PIN PE3 -#define FLASH_CS_PIN PC13 -#define MAX7456_SPI_CS_PIN PD2 -#define GYRO_1_EXTI_PIN PC4 -#define GYRO_1_CS_PIN PB7 -#define GYRO_2_EXTI_PIN PB2 -#define GYRO_2_CS_PIN PB8 - -#define USE_GYRO_CLKIN -#define GYRO_1_CLKIN_PIN PB9 -#define GYRO_2_CLKIN_PIN PB9 - -#define TIMER_PIN_MAPPING \ - TIMER_PIN_MAP( 0, PA0, 1, 0) \ - TIMER_PIN_MAP( 1, PA1, 1, 1) \ - TIMER_PIN_MAP( 2, PA2, 1, 2) \ - TIMER_PIN_MAP( 3, PA3, 1, 3) \ - TIMER_PIN_MAP( 4, PD12, 1, 4) \ - TIMER_PIN_MAP( 5, PD13, 1, 5) \ - TIMER_PIN_MAP( 6, PD14, 1, 6) \ - TIMER_PIN_MAP( 7, PD15, 1, 7) \ - TIMER_PIN_MAP( 8, PE5, 1, -1) \ - TIMER_PIN_MAP( 9, PE6, 1, -1) \ - TIMER_PIN_MAP( 10, PC8, 1, -1) \ - TIMER_PIN_MAP( 11, PC9, 1, -1) \ - TIMER_PIN_MAP( 12, PB9, 1, -1) \ - TIMER_PIN_MAP( 13, PE9 , 1, 8) - -#define ADC1_DMA_OPT 9 -#define ADC3_DMA_OPT 10 - -#define FLASH_SPI_INSTANCE SPI3 -#define MAX7456_SPI_INSTANCE SPI2 - -#define BARO_I2C_INSTANCE I2CDEV_2 -#define MAG_I2C_INSTANCE I2CDEV_2 - -#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH -#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON -#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC -#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC - -#define DEFAULT_CURRENT_METER_SCALE 120 -#define DEFAULT_VOLTAGE_METER_SCALE 210 - -#define BEEPER_INVERTED - -#define PINIO1_BOX 40 -#define BOX_USER1_NAME "CAM 1,2" -#define PINIO2_BOX 41 -#define BOX_USER2_NAME "12V BEC" - -#define GYRO_1_SPI_INSTANCE SPI1 -#define GYRO_1_ALIGN CW270_DEG -#define GYRO_2_SPI_INSTANCE SPI4 -#define GYRO_2_ALIGN CW0_DEG - -#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH - -#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 -#define GPS_UART SERIAL_PORT_USART6 -#define ESC_SENSOR_UART SERIAL_PORT_USART8 From fb72fb24c5c913e2905775207f05f92617f6afc4 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 16:52:54 +0800 Subject: [PATCH 08/15] Create config.h --- configs/ZTWF/ZTWH743/config.h | 157 ++++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 configs/ZTWF/ZTWH743/config.h diff --git a/configs/ZTWF/ZTWH743/config.h b/configs/ZTWF/ZTWH743/config.h new file mode 100644 index 000000000..cccb2cac1 --- /dev/null +++ b/configs/ZTWF/ZTWH743/config.h @@ -0,0 +1,157 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + + /* + SUPPORTED TARGET - THANK YOU + REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 + DATE: 2026-05-01 +*/ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME ZTWH743 +#define MANUFACTURER_ID ZTWF + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P + +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 + +#define BEEPER_PIN PC2 +#define MOTOR1_PIN PA0 +#define MOTOR2_PIN PA1 +#define MOTOR3_PIN PA2 +#define MOTOR4_PIN PA3 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PD14 +#define MOTOR8_PIN PD15 +#define LED_STRIP_PIN PE9 +#define SERVO1_PIN PE5 // S9 +#define SERVO2_PIN PE6 // S10 +#define SERVO3_PIN PC8 // S11 +#define SERVO4_PIN PC9 // S12 +#define UART1_TX_PIN PA9 +#define UART1_RX_PIN PA10 +#define UART2_TX_PIN PD5 +#define UART2_RX_PIN PD6 +#define UART3_TX_PIN PD8 +#define UART3_RX_PIN PD9 +#define UART4_TX_PIN PD1 +#define UART4_RX_PIN PD0 +#define UART5_TX_PIN PB6 +#define UART5_RX_PIN PB5 +#define UART6_TX_PIN PC6 +#define UART6_RX_PIN PC7 +#define UART7_TX_PIN PE8 +#define UART7_RX_PIN PE7 +#define UART8_TX_PIN PE1 +#define UART8_RX_PIN PE0 +#define I2C2_SCL_PIN PB10 +#define I2C2_SDA_PIN PB11 +#define LED0_PIN PB3 +#define LED1_PIN PB4 +#define SPI1_SCK_PIN PA5 +#define SPI1_SDI_PIN PA6 +#define SPI1_SDO_PIN PA7 +#define SPI2_SCK_PIN PB13 +#define SPI2_SDI_PIN PB14 +#define SPI2_SDO_PIN PB15 +#define SPI3_SCK_PIN PC10 +#define SPI3_SDI_PIN PC11 +#define SPI3_SDO_PIN PC12 +#define SPI4_SCK_PIN PE12 +#define SPI4_SDI_PIN PE13 +#define SPI4_SDO_PIN PE14 +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define PINIO1_PIN PE2 +#define PINIO2_PIN PE3 +#define FLASH_CS_PIN PC13 +#define MAX7456_SPI_CS_PIN PD2 +#define GYRO_1_EXTI_PIN PC4 +#define GYRO_1_CS_PIN PB7 +#define GYRO_2_EXTI_PIN PB2 +#define GYRO_2_CS_PIN PB8 + +#define USE_GYRO_CLKIN +#define GYRO_1_CLKIN_PIN PB9 +#define GYRO_2_CLKIN_PIN PB9 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, PA0, 1, 0) \ + TIMER_PIN_MAP( 1, PA1, 1, 1) \ + TIMER_PIN_MAP( 2, PA2, 1, 2) \ + TIMER_PIN_MAP( 3, PA3, 1, 3) \ + TIMER_PIN_MAP( 4, PD12, 1, 4) \ + TIMER_PIN_MAP( 5, PD13, 1, 5) \ + TIMER_PIN_MAP( 6, PD14, 1, 6) \ + TIMER_PIN_MAP( 7, PD15, 1, 7) \ + TIMER_PIN_MAP( 8, PE5, 1, -1) \ + TIMER_PIN_MAP( 9, PE6, 1, -1) \ + TIMER_PIN_MAP( 10, PC8, 1, -1) \ + TIMER_PIN_MAP( 11, PC9, 1, -1) \ + TIMER_PIN_MAP( 12, PB9, 1, -1) \ + TIMER_PIN_MAP( 13, PE9 , 1, 8) + +#define ADC1_DMA_OPT 9 +#define ADC3_DMA_OPT 10 + +#define FLASH_SPI_INSTANCE SPI3 +#define MAX7456_SPI_INSTANCE SPI2 + +#define BARO_I2C_INSTANCE I2CDEV_2 +#define MAG_I2C_INSTANCE I2CDEV_2 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC + +#define DEFAULT_CURRENT_METER_SCALE 120 +#define DEFAULT_VOLTAGE_METER_SCALE 210 + +#define BEEPER_INVERTED + +#define PINIO1_BOX 40 +#define BOX_USER1_NAME "CAM 1,2" +#define PINIO2_BOX 41 +#define BOX_USER2_NAME "12V BEC" + +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW270_DEG +#define GYRO_2_SPI_INSTANCE SPI4 +#define GYRO_2_ALIGN CW0_DEG + +#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH + +#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 +#define GPS_UART SERIAL_PORT_USART6 +#define ESC_SENSOR_UART SERIAL_PORT_USART8 From 6cc2ecf4fd1767dcf95194acec3d886f5842a81d Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 16:53:36 +0800 Subject: [PATCH 09/15] Delete configs/ZTWF/ZTWH743/config.h --- configs/ZTWF/ZTWH743/config.h | 157 ---------------------------------- 1 file changed, 157 deletions(-) delete mode 100644 configs/ZTWF/ZTWH743/config.h diff --git a/configs/ZTWF/ZTWH743/config.h b/configs/ZTWF/ZTWH743/config.h deleted file mode 100644 index cccb2cac1..000000000 --- a/configs/ZTWF/ZTWH743/config.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of Betaflight. - * - * Betaflight is free software. You can redistribute this software - * and/or modify this software under the terms of the GNU General - * Public License as published by the Free Software Foundation, - * either version 3 of the License, or (at your option) any later - * version. - * - * Betaflight is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this software. - * - * If not, see . - */ - - /* - SUPPORTED TARGET - THANK YOU - REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 - DATE: 2026-05-01 -*/ - -#pragma once - -#define FC_TARGET_MCU STM32H743 - -#define BOARD_NAME ZTWH743 -#define MANUFACTURER_ID ZTWF - -#define USE_ACC -#define USE_ACC_SPI_ICM42688P -#define USE_GYRO -#define USE_GYRO_SPI_ICM42688P - -#define USE_BARO -#define USE_BARO_BMP280 -#define USE_BARO_DPS310 -#define USE_FLASH -#define USE_FLASH_W25Q128FV -#define USE_MAX7456 - -#define BEEPER_PIN PC2 -#define MOTOR1_PIN PA0 -#define MOTOR2_PIN PA1 -#define MOTOR3_PIN PA2 -#define MOTOR4_PIN PA3 -#define MOTOR5_PIN PD12 -#define MOTOR6_PIN PD13 -#define MOTOR7_PIN PD14 -#define MOTOR8_PIN PD15 -#define LED_STRIP_PIN PE9 -#define SERVO1_PIN PE5 // S9 -#define SERVO2_PIN PE6 // S10 -#define SERVO3_PIN PC8 // S11 -#define SERVO4_PIN PC9 // S12 -#define UART1_TX_PIN PA9 -#define UART1_RX_PIN PA10 -#define UART2_TX_PIN PD5 -#define UART2_RX_PIN PD6 -#define UART3_TX_PIN PD8 -#define UART3_RX_PIN PD9 -#define UART4_TX_PIN PD1 -#define UART4_RX_PIN PD0 -#define UART5_TX_PIN PB6 -#define UART5_RX_PIN PB5 -#define UART6_TX_PIN PC6 -#define UART6_RX_PIN PC7 -#define UART7_TX_PIN PE8 -#define UART7_RX_PIN PE7 -#define UART8_TX_PIN PE1 -#define UART8_RX_PIN PE0 -#define I2C2_SCL_PIN PB10 -#define I2C2_SDA_PIN PB11 -#define LED0_PIN PB3 -#define LED1_PIN PB4 -#define SPI1_SCK_PIN PA5 -#define SPI1_SDI_PIN PA6 -#define SPI1_SDO_PIN PA7 -#define SPI2_SCK_PIN PB13 -#define SPI2_SDI_PIN PB14 -#define SPI2_SDO_PIN PB15 -#define SPI3_SCK_PIN PC10 -#define SPI3_SDI_PIN PC11 -#define SPI3_SDO_PIN PC12 -#define SPI4_SCK_PIN PE12 -#define SPI4_SDI_PIN PE13 -#define SPI4_SDO_PIN PE14 -#define ADC_VBAT_PIN PC0 -#define ADC_CURR_PIN PC1 -#define PINIO1_PIN PE2 -#define PINIO2_PIN PE3 -#define FLASH_CS_PIN PC13 -#define MAX7456_SPI_CS_PIN PD2 -#define GYRO_1_EXTI_PIN PC4 -#define GYRO_1_CS_PIN PB7 -#define GYRO_2_EXTI_PIN PB2 -#define GYRO_2_CS_PIN PB8 - -#define USE_GYRO_CLKIN -#define GYRO_1_CLKIN_PIN PB9 -#define GYRO_2_CLKIN_PIN PB9 - -#define TIMER_PIN_MAPPING \ - TIMER_PIN_MAP( 0, PA0, 1, 0) \ - TIMER_PIN_MAP( 1, PA1, 1, 1) \ - TIMER_PIN_MAP( 2, PA2, 1, 2) \ - TIMER_PIN_MAP( 3, PA3, 1, 3) \ - TIMER_PIN_MAP( 4, PD12, 1, 4) \ - TIMER_PIN_MAP( 5, PD13, 1, 5) \ - TIMER_PIN_MAP( 6, PD14, 1, 6) \ - TIMER_PIN_MAP( 7, PD15, 1, 7) \ - TIMER_PIN_MAP( 8, PE5, 1, -1) \ - TIMER_PIN_MAP( 9, PE6, 1, -1) \ - TIMER_PIN_MAP( 10, PC8, 1, -1) \ - TIMER_PIN_MAP( 11, PC9, 1, -1) \ - TIMER_PIN_MAP( 12, PB9, 1, -1) \ - TIMER_PIN_MAP( 13, PE9 , 1, 8) - -#define ADC1_DMA_OPT 9 -#define ADC3_DMA_OPT 10 - -#define FLASH_SPI_INSTANCE SPI3 -#define MAX7456_SPI_INSTANCE SPI2 - -#define BARO_I2C_INSTANCE I2CDEV_2 -#define MAG_I2C_INSTANCE I2CDEV_2 - -#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH -#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON -#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC -#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC - -#define DEFAULT_CURRENT_METER_SCALE 120 -#define DEFAULT_VOLTAGE_METER_SCALE 210 - -#define BEEPER_INVERTED - -#define PINIO1_BOX 40 -#define BOX_USER1_NAME "CAM 1,2" -#define PINIO2_BOX 41 -#define BOX_USER2_NAME "12V BEC" - -#define GYRO_1_SPI_INSTANCE SPI1 -#define GYRO_1_ALIGN CW270_DEG -#define GYRO_2_SPI_INSTANCE SPI4 -#define GYRO_2_ALIGN CW0_DEG - -#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH - -#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 -#define GPS_UART SERIAL_PORT_USART6 -#define ESC_SENSOR_UART SERIAL_PORT_USART8 From 3d67a1ba8ec57842a3358f089c3d69e55912a5bd Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 16:54:12 +0800 Subject: [PATCH 10/15] Create config.h --- configs/ZTWF /ZTWH743 /config.h | 157 ++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 configs/ZTWF /ZTWH743 /config.h diff --git a/configs/ZTWF /ZTWH743 /config.h b/configs/ZTWF /ZTWH743 /config.h new file mode 100644 index 000000000..cccb2cac1 --- /dev/null +++ b/configs/ZTWF /ZTWH743 /config.h @@ -0,0 +1,157 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + + /* + SUPPORTED TARGET - THANK YOU + REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 + DATE: 2026-05-01 +*/ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME ZTWH743 +#define MANUFACTURER_ID ZTWF + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P + +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 + +#define BEEPER_PIN PC2 +#define MOTOR1_PIN PA0 +#define MOTOR2_PIN PA1 +#define MOTOR3_PIN PA2 +#define MOTOR4_PIN PA3 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PD14 +#define MOTOR8_PIN PD15 +#define LED_STRIP_PIN PE9 +#define SERVO1_PIN PE5 // S9 +#define SERVO2_PIN PE6 // S10 +#define SERVO3_PIN PC8 // S11 +#define SERVO4_PIN PC9 // S12 +#define UART1_TX_PIN PA9 +#define UART1_RX_PIN PA10 +#define UART2_TX_PIN PD5 +#define UART2_RX_PIN PD6 +#define UART3_TX_PIN PD8 +#define UART3_RX_PIN PD9 +#define UART4_TX_PIN PD1 +#define UART4_RX_PIN PD0 +#define UART5_TX_PIN PB6 +#define UART5_RX_PIN PB5 +#define UART6_TX_PIN PC6 +#define UART6_RX_PIN PC7 +#define UART7_TX_PIN PE8 +#define UART7_RX_PIN PE7 +#define UART8_TX_PIN PE1 +#define UART8_RX_PIN PE0 +#define I2C2_SCL_PIN PB10 +#define I2C2_SDA_PIN PB11 +#define LED0_PIN PB3 +#define LED1_PIN PB4 +#define SPI1_SCK_PIN PA5 +#define SPI1_SDI_PIN PA6 +#define SPI1_SDO_PIN PA7 +#define SPI2_SCK_PIN PB13 +#define SPI2_SDI_PIN PB14 +#define SPI2_SDO_PIN PB15 +#define SPI3_SCK_PIN PC10 +#define SPI3_SDI_PIN PC11 +#define SPI3_SDO_PIN PC12 +#define SPI4_SCK_PIN PE12 +#define SPI4_SDI_PIN PE13 +#define SPI4_SDO_PIN PE14 +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define PINIO1_PIN PE2 +#define PINIO2_PIN PE3 +#define FLASH_CS_PIN PC13 +#define MAX7456_SPI_CS_PIN PD2 +#define GYRO_1_EXTI_PIN PC4 +#define GYRO_1_CS_PIN PB7 +#define GYRO_2_EXTI_PIN PB2 +#define GYRO_2_CS_PIN PB8 + +#define USE_GYRO_CLKIN +#define GYRO_1_CLKIN_PIN PB9 +#define GYRO_2_CLKIN_PIN PB9 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, PA0, 1, 0) \ + TIMER_PIN_MAP( 1, PA1, 1, 1) \ + TIMER_PIN_MAP( 2, PA2, 1, 2) \ + TIMER_PIN_MAP( 3, PA3, 1, 3) \ + TIMER_PIN_MAP( 4, PD12, 1, 4) \ + TIMER_PIN_MAP( 5, PD13, 1, 5) \ + TIMER_PIN_MAP( 6, PD14, 1, 6) \ + TIMER_PIN_MAP( 7, PD15, 1, 7) \ + TIMER_PIN_MAP( 8, PE5, 1, -1) \ + TIMER_PIN_MAP( 9, PE6, 1, -1) \ + TIMER_PIN_MAP( 10, PC8, 1, -1) \ + TIMER_PIN_MAP( 11, PC9, 1, -1) \ + TIMER_PIN_MAP( 12, PB9, 1, -1) \ + TIMER_PIN_MAP( 13, PE9 , 1, 8) + +#define ADC1_DMA_OPT 9 +#define ADC3_DMA_OPT 10 + +#define FLASH_SPI_INSTANCE SPI3 +#define MAX7456_SPI_INSTANCE SPI2 + +#define BARO_I2C_INSTANCE I2CDEV_2 +#define MAG_I2C_INSTANCE I2CDEV_2 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC + +#define DEFAULT_CURRENT_METER_SCALE 120 +#define DEFAULT_VOLTAGE_METER_SCALE 210 + +#define BEEPER_INVERTED + +#define PINIO1_BOX 40 +#define BOX_USER1_NAME "CAM 1,2" +#define PINIO2_BOX 41 +#define BOX_USER2_NAME "12V BEC" + +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW270_DEG +#define GYRO_2_SPI_INSTANCE SPI4 +#define GYRO_2_ALIGN CW0_DEG + +#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH + +#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 +#define GPS_UART SERIAL_PORT_USART6 +#define ESC_SENSOR_UART SERIAL_PORT_USART8 From a7347700ab8539527f5b784ecc7d72b0b9b736d2 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 16:55:22 +0800 Subject: [PATCH 11/15] Delete configs/ZTWF /ZTWH743 /config.h --- configs/ZTWF /ZTWH743 /config.h | 157 -------------------------------- 1 file changed, 157 deletions(-) delete mode 100644 configs/ZTWF /ZTWH743 /config.h diff --git a/configs/ZTWF /ZTWH743 /config.h b/configs/ZTWF /ZTWH743 /config.h deleted file mode 100644 index cccb2cac1..000000000 --- a/configs/ZTWF /ZTWH743 /config.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of Betaflight. - * - * Betaflight is free software. You can redistribute this software - * and/or modify this software under the terms of the GNU General - * Public License as published by the Free Software Foundation, - * either version 3 of the License, or (at your option) any later - * version. - * - * Betaflight is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this software. - * - * If not, see . - */ - - /* - SUPPORTED TARGET - THANK YOU - REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 - DATE: 2026-05-01 -*/ - -#pragma once - -#define FC_TARGET_MCU STM32H743 - -#define BOARD_NAME ZTWH743 -#define MANUFACTURER_ID ZTWF - -#define USE_ACC -#define USE_ACC_SPI_ICM42688P -#define USE_GYRO -#define USE_GYRO_SPI_ICM42688P - -#define USE_BARO -#define USE_BARO_BMP280 -#define USE_BARO_DPS310 -#define USE_FLASH -#define USE_FLASH_W25Q128FV -#define USE_MAX7456 - -#define BEEPER_PIN PC2 -#define MOTOR1_PIN PA0 -#define MOTOR2_PIN PA1 -#define MOTOR3_PIN PA2 -#define MOTOR4_PIN PA3 -#define MOTOR5_PIN PD12 -#define MOTOR6_PIN PD13 -#define MOTOR7_PIN PD14 -#define MOTOR8_PIN PD15 -#define LED_STRIP_PIN PE9 -#define SERVO1_PIN PE5 // S9 -#define SERVO2_PIN PE6 // S10 -#define SERVO3_PIN PC8 // S11 -#define SERVO4_PIN PC9 // S12 -#define UART1_TX_PIN PA9 -#define UART1_RX_PIN PA10 -#define UART2_TX_PIN PD5 -#define UART2_RX_PIN PD6 -#define UART3_TX_PIN PD8 -#define UART3_RX_PIN PD9 -#define UART4_TX_PIN PD1 -#define UART4_RX_PIN PD0 -#define UART5_TX_PIN PB6 -#define UART5_RX_PIN PB5 -#define UART6_TX_PIN PC6 -#define UART6_RX_PIN PC7 -#define UART7_TX_PIN PE8 -#define UART7_RX_PIN PE7 -#define UART8_TX_PIN PE1 -#define UART8_RX_PIN PE0 -#define I2C2_SCL_PIN PB10 -#define I2C2_SDA_PIN PB11 -#define LED0_PIN PB3 -#define LED1_PIN PB4 -#define SPI1_SCK_PIN PA5 -#define SPI1_SDI_PIN PA6 -#define SPI1_SDO_PIN PA7 -#define SPI2_SCK_PIN PB13 -#define SPI2_SDI_PIN PB14 -#define SPI2_SDO_PIN PB15 -#define SPI3_SCK_PIN PC10 -#define SPI3_SDI_PIN PC11 -#define SPI3_SDO_PIN PC12 -#define SPI4_SCK_PIN PE12 -#define SPI4_SDI_PIN PE13 -#define SPI4_SDO_PIN PE14 -#define ADC_VBAT_PIN PC0 -#define ADC_CURR_PIN PC1 -#define PINIO1_PIN PE2 -#define PINIO2_PIN PE3 -#define FLASH_CS_PIN PC13 -#define MAX7456_SPI_CS_PIN PD2 -#define GYRO_1_EXTI_PIN PC4 -#define GYRO_1_CS_PIN PB7 -#define GYRO_2_EXTI_PIN PB2 -#define GYRO_2_CS_PIN PB8 - -#define USE_GYRO_CLKIN -#define GYRO_1_CLKIN_PIN PB9 -#define GYRO_2_CLKIN_PIN PB9 - -#define TIMER_PIN_MAPPING \ - TIMER_PIN_MAP( 0, PA0, 1, 0) \ - TIMER_PIN_MAP( 1, PA1, 1, 1) \ - TIMER_PIN_MAP( 2, PA2, 1, 2) \ - TIMER_PIN_MAP( 3, PA3, 1, 3) \ - TIMER_PIN_MAP( 4, PD12, 1, 4) \ - TIMER_PIN_MAP( 5, PD13, 1, 5) \ - TIMER_PIN_MAP( 6, PD14, 1, 6) \ - TIMER_PIN_MAP( 7, PD15, 1, 7) \ - TIMER_PIN_MAP( 8, PE5, 1, -1) \ - TIMER_PIN_MAP( 9, PE6, 1, -1) \ - TIMER_PIN_MAP( 10, PC8, 1, -1) \ - TIMER_PIN_MAP( 11, PC9, 1, -1) \ - TIMER_PIN_MAP( 12, PB9, 1, -1) \ - TIMER_PIN_MAP( 13, PE9 , 1, 8) - -#define ADC1_DMA_OPT 9 -#define ADC3_DMA_OPT 10 - -#define FLASH_SPI_INSTANCE SPI3 -#define MAX7456_SPI_INSTANCE SPI2 - -#define BARO_I2C_INSTANCE I2CDEV_2 -#define MAG_I2C_INSTANCE I2CDEV_2 - -#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH -#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON -#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC -#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC - -#define DEFAULT_CURRENT_METER_SCALE 120 -#define DEFAULT_VOLTAGE_METER_SCALE 210 - -#define BEEPER_INVERTED - -#define PINIO1_BOX 40 -#define BOX_USER1_NAME "CAM 1,2" -#define PINIO2_BOX 41 -#define BOX_USER2_NAME "12V BEC" - -#define GYRO_1_SPI_INSTANCE SPI1 -#define GYRO_1_ALIGN CW270_DEG -#define GYRO_2_SPI_INSTANCE SPI4 -#define GYRO_2_ALIGN CW0_DEG - -#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH - -#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 -#define GPS_UART SERIAL_PORT_USART6 -#define ESC_SENSOR_UART SERIAL_PORT_USART8 From 2e018dee90c269fcb135ad2dd740e59cbe29fa6b Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 16:55:50 +0800 Subject: [PATCH 12/15] Create config.h --- configs/ZTWF/ZTWH743/config.h | 157 ++++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 configs/ZTWF/ZTWH743/config.h diff --git a/configs/ZTWF/ZTWH743/config.h b/configs/ZTWF/ZTWH743/config.h new file mode 100644 index 000000000..cccb2cac1 --- /dev/null +++ b/configs/ZTWF/ZTWH743/config.h @@ -0,0 +1,157 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + + /* + SUPPORTED TARGET - THANK YOU + REFERENCE: sha256_01784083de1111f3fb21789953020e6c5542496842f9104dc32c3e29ab94f5f5 + DATE: 2026-05-01 +*/ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME ZTWH743 +#define MANUFACTURER_ID ZTWF + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P + +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 + +#define BEEPER_PIN PC2 +#define MOTOR1_PIN PA0 +#define MOTOR2_PIN PA1 +#define MOTOR3_PIN PA2 +#define MOTOR4_PIN PA3 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PD14 +#define MOTOR8_PIN PD15 +#define LED_STRIP_PIN PE9 +#define SERVO1_PIN PE5 // S9 +#define SERVO2_PIN PE6 // S10 +#define SERVO3_PIN PC8 // S11 +#define SERVO4_PIN PC9 // S12 +#define UART1_TX_PIN PA9 +#define UART1_RX_PIN PA10 +#define UART2_TX_PIN PD5 +#define UART2_RX_PIN PD6 +#define UART3_TX_PIN PD8 +#define UART3_RX_PIN PD9 +#define UART4_TX_PIN PD1 +#define UART4_RX_PIN PD0 +#define UART5_TX_PIN PB6 +#define UART5_RX_PIN PB5 +#define UART6_TX_PIN PC6 +#define UART6_RX_PIN PC7 +#define UART7_TX_PIN PE8 +#define UART7_RX_PIN PE7 +#define UART8_TX_PIN PE1 +#define UART8_RX_PIN PE0 +#define I2C2_SCL_PIN PB10 +#define I2C2_SDA_PIN PB11 +#define LED0_PIN PB3 +#define LED1_PIN PB4 +#define SPI1_SCK_PIN PA5 +#define SPI1_SDI_PIN PA6 +#define SPI1_SDO_PIN PA7 +#define SPI2_SCK_PIN PB13 +#define SPI2_SDI_PIN PB14 +#define SPI2_SDO_PIN PB15 +#define SPI3_SCK_PIN PC10 +#define SPI3_SDI_PIN PC11 +#define SPI3_SDO_PIN PC12 +#define SPI4_SCK_PIN PE12 +#define SPI4_SDI_PIN PE13 +#define SPI4_SDO_PIN PE14 +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define PINIO1_PIN PE2 +#define PINIO2_PIN PE3 +#define FLASH_CS_PIN PC13 +#define MAX7456_SPI_CS_PIN PD2 +#define GYRO_1_EXTI_PIN PC4 +#define GYRO_1_CS_PIN PB7 +#define GYRO_2_EXTI_PIN PB2 +#define GYRO_2_CS_PIN PB8 + +#define USE_GYRO_CLKIN +#define GYRO_1_CLKIN_PIN PB9 +#define GYRO_2_CLKIN_PIN PB9 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, PA0, 1, 0) \ + TIMER_PIN_MAP( 1, PA1, 1, 1) \ + TIMER_PIN_MAP( 2, PA2, 1, 2) \ + TIMER_PIN_MAP( 3, PA3, 1, 3) \ + TIMER_PIN_MAP( 4, PD12, 1, 4) \ + TIMER_PIN_MAP( 5, PD13, 1, 5) \ + TIMER_PIN_MAP( 6, PD14, 1, 6) \ + TIMER_PIN_MAP( 7, PD15, 1, 7) \ + TIMER_PIN_MAP( 8, PE5, 1, -1) \ + TIMER_PIN_MAP( 9, PE6, 1, -1) \ + TIMER_PIN_MAP( 10, PC8, 1, -1) \ + TIMER_PIN_MAP( 11, PC9, 1, -1) \ + TIMER_PIN_MAP( 12, PB9, 1, -1) \ + TIMER_PIN_MAP( 13, PE9 , 1, 8) + +#define ADC1_DMA_OPT 9 +#define ADC3_DMA_OPT 10 + +#define FLASH_SPI_INSTANCE SPI3 +#define MAX7456_SPI_INSTANCE SPI2 + +#define BARO_I2C_INSTANCE I2CDEV_2 +#define MAG_I2C_INSTANCE I2CDEV_2 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC + +#define DEFAULT_CURRENT_METER_SCALE 120 +#define DEFAULT_VOLTAGE_METER_SCALE 210 + +#define BEEPER_INVERTED + +#define PINIO1_BOX 40 +#define BOX_USER1_NAME "CAM 1,2" +#define PINIO2_BOX 41 +#define BOX_USER2_NAME "12V BEC" + +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW270_DEG +#define GYRO_2_SPI_INSTANCE SPI4 +#define GYRO_2_ALIGN CW0_DEG + +#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH + +#define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 +#define GPS_UART SERIAL_PORT_USART6 +#define ESC_SENSOR_UART SERIAL_PORT_USART8 From 139c56d71b23ac9b8cfe37c26d6d392ff6b52143 Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Wed, 11 Nov 2026 21:10:09 +0800 Subject: [PATCH 13/15] Update config.h --- configs/ZTWF/ZTWH743/config.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/ZTWF/ZTWH743/config.h b/configs/ZTWF/ZTWH743/config.h index cccb2cac1..7bb293922 100644 --- a/configs/ZTWF/ZTWH743/config.h +++ b/configs/ZTWF/ZTWH743/config.h @@ -152,6 +152,10 @@ #define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH +#ifdef USE_OSD_HD #define MSP_DISPLAYPORT_UART SERIAL_PORT_UART4 +#endif +#ifdef USE_GPS #define GPS_UART SERIAL_PORT_USART6 +#endif #define ESC_SENSOR_UART SERIAL_PORT_USART8 From 38ce3ae1cbc8ccc204bbfb0304425f8ee80b224f Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Thu, 12 Nov 2026 23:33:21 +0800 Subject: [PATCH 14/15] Update config.h --- configs/ZTWF/ZTWH743/config.h | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/ZTWF/ZTWH743/config.h b/configs/ZTWF/ZTWH743/config.h index 7bb293922..edcac9c43 100644 --- a/configs/ZTWF/ZTWH743/config.h +++ b/configs/ZTWF/ZTWH743/config.h @@ -135,7 +135,6 @@ #define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC #define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC -#define DEFAULT_CURRENT_METER_SCALE 120 #define DEFAULT_VOLTAGE_METER_SCALE 210 #define BEEPER_INVERTED From 31be6fb94b2046135a5557ae5b5badac79c2d8be Mon Sep 17 00:00:00 2001 From: Unicorn_YIHAO <79907912+lyh6767@users.noreply.github.com> Date: Mon, 16 Nov 2026 10:34:35 +0800 Subject: [PATCH 15/15] Update configs/ZTWF/ZTWH743/config.h Co-authored-by: ot0tot <36753790+ot0tot@users.noreply.github.com> --- configs/ZTWF/ZTWH743/config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/ZTWF/ZTWH743/config.h b/configs/ZTWF/ZTWH743/config.h index edcac9c43..7210c562a 100644 --- a/configs/ZTWF/ZTWH743/config.h +++ b/configs/ZTWF/ZTWH743/config.h @@ -113,7 +113,7 @@ TIMER_PIN_MAP( 4, PD12, 1, 4) \ TIMER_PIN_MAP( 5, PD13, 1, 5) \ TIMER_PIN_MAP( 6, PD14, 1, 6) \ - TIMER_PIN_MAP( 7, PD15, 1, 7) \ + TIMER_PIN_MAP( 7, PD15, 1, -1) \ TIMER_PIN_MAP( 8, PE5, 1, -1) \ TIMER_PIN_MAP( 9, PE6, 1, -1) \ TIMER_PIN_MAP( 10, PC8, 1, -1) \