Skip to content

Latest commit

 

History

History
31 lines (20 loc) · 1.62 KB

README.md

File metadata and controls

31 lines (20 loc) · 1.62 KB

Other parts of this project

This is the firmware repository containing all firmware source files. There are three more repositories for this project:

ENNOID-BMS Hardware The hardware sourcefiles.

ENNOID-BMS Bootloader Same as DieBieMS bootloader. Can be flashed with the BMS Tool in the firmware tab or with an STlink-V2.

MaxkGo-BMS Configuration tool the tool to configure the MaxkGo-BMS and upload the bootloader / update the main firmware.

Building with GCC

  • Install arm-none-eabi-gcc
  • Configure generalDefines.h for MKBMS-LV-MINI, MKBMS-SS-MINI, MKBMS-SS-24S-MINI versions
  • Makefile has rules for flashing with STLink or JLink
  • Could also load using bootloader with binary

When flashing the application the start address should be: 0x08000000 When flashing the bootloader the start address should be: 0x08032000

The flash is formatted as follows (summary):

((uint32_t)0x08000000) /* Base @ of Page 0, 2 Kbytes / // Startup Code - Main application
((uint32_t)0x08000800) /
Base @ of Page 1, 2 Kbytes / // Page0 - EEPROM emulation
((uint32_t)0x08001000) /
Base @ of Page 2, 2 Kbytes / // Page1 - EEPROM emulation
((uint32_t)0x08001800) /
Base @ of Page 3, 2 Kbytes / // Remainder of the main application firmware stars from here.
((uint32_t)0x08019000) /
Base @ of Page 50, 2 Kbytes / // New app firmware base addres
((uint32_t)0x08032000) /
Base @ of Page 100, 2 Kbytes */ // Bootloader base

See "modFlash.h" and "modFlash.c" for more info.