ESP32 S3 N16R8 + 2.4" 240x320 ST7789

[datodato788]

I need help connecting them together and writing the system
If anyone has a .bin please send it to me or help me

[Yag00000]

try S3 Smoochiee .bin

[datodato788]

try S3 Smoochiee .bin

I tried, but it didn't work.

[Ranger01x]

2.4 ST7789 and with esp32s3 both seems critical like you'd have to edit in your way because no .bin is made for standalone such board with following 2.4 st7789 TFT guess youll need to make many changes or set up for your own board. I can help with it if you want.. just dm me on ig @sxhizo.ranger0.01x

[Aryann019x]

I need help connecting them together and writing the system If anyone has a .bin please send it to me or help me

I added support for a few custom Bruce ESP32 boards here, including ESP32-S3 + ST7789:

https://github.com/Aryann019x/firmware/releases/tag/v1.0.0-custom-boards

PR:
#2334

If your screen is ST7789, the main thing is getting the pin mapping and display config right first. I’d suggest testing only the display first, then adding the rest after that.

For Bruce / PlatformIO side, the important parts are usually:

• correct board env
• ST7789 driver selected
• correct width/height for your panel
• right SPI / DC / RST / BL pins

If you want, send your exact pin mapping and I can probably help point you in the right direction.

[rhenzorquiza15]

Can you help me i have ESP32S3 and my screen is ili9341

If your screen is ST7789, the main thing is getting the pin mapping and display config right first. I’d suggest testing only the display first, then adding the rest after that.